task shutdown_delay will currently only run if there are registered
services for the task. This implementation detail isn't explicity stated
anywhere and is defined outside of the service stanza.
This change moves shutdown_delay to be evaluated after prekill hooks are
run, outside of any task runner hooks.
just use time.sleep
This commit is an initial (read: janky) approach to forwarding state
from an allocrunner hook to a taskrunner using a similar `hookResources`
approach that tr's use internally.
It should eventually probably be replaced with something a little bit
more message based, but for things that only come from pre-run hooks,
and don't change, it's probably fine for now.
This changeset is some pre-requisite boilerplate that is required for
introducing CSI volume management for client nodes.
It extracts out fingerprinting logic from the csi instance manager.
This change is to facilitate reusing the csimanager to also manage the
node-local CSI functionality, as it is the easiest place for us to
guaruntee health checking and to provide additional visibility into the
running operations through the fingerprinter mechanism and goroutine.
It also introduces the VolumeMounter interface that will be used to
manage staging/publishing unstaging/unpublishing of volumes on the host.
This changeset implements the initial registration and fingerprinting
of CSI Plugins as part of #5378. At a high level, it introduces the
following:
* A `csi_plugin` stanza as part of a Nomad task configuration, to
allow a task to expose that it is a plugin.
* A new task runner hook: `csi_plugin_supervisor`. This hook does two
things. When the `csi_plugin` stanza is detected, it will
automatically configure the plugin task to receive bidirectional
mounts to the CSI intermediary directory. At runtime, it will then
perform an initial heartbeat of the plugin and handle submitting it to
the new `dynamicplugins.Registry` for further use by the client, and
then run a lightweight heartbeat loop that will emit task events
when health changes.
* The `dynamicplugins.Registry` for handling plugins that run
as Nomad tasks, in contrast to the existing catalog that requires
`go-plugin` type plugins and to know the plugin configuration in
advance.
* The `csimanager` which fingerprints CSI plugins, in a similar way to
`drivermanager` and `devicemanager`. It currently only fingerprints
the NodeID from the plugin, and assumes that all plugins are
monolithic.
Missing features
* We do not use the live updates of the `dynamicplugin` registry in
the `csimanager` yet.
* We do not deregister the plugins from the client when they shutdown
yet, they just become indefinitely marked as unhealthy. This is
deliberate until we figure out how we should manage deploying new
versions of plugins/transitioning them.
When a job is configured with Consul Connect aware tasks (i.e. sidecar),
the Nomad Client should be able to request from Consul (through Nomad Server)
Service Identity tokens specific to those tasks.
Now that alloc.Canonicalize() is called in all alloc sources in the
client (i.e. on state restore and RPC fetching), we no longer need to
check alloc.TaskResources.
alloc.AllocatedResources is always non-nil through alloc runner.
Though, early on, we check for alloc validity, so NewTaskRunner and
TaskEnv must still check. `TestClient_AddAllocError` test validates
that behavior.
makeAllocTaskServices did not do a nil check on AllocatedResources
which causes a panic when upgrading directly from 0.8 to 0.10. While
skipping 0.9 is not supported we intend to fix serious crashers caused
by such upgrades to prevent cluster outages.
I did a quick audit of the client package and everywhere else that
accesses AllocatedResources appears to be properly guarded by a nil
check.
Currently, there is an issue when running on Windows whereby under some
circumstances the Windows stats API's will begin to return errors (such
as internal timeouts) when a client is under high load, and potentially
other forms of resource contention / system states (and other unknown
cases).
When an error occurs during this collection, we then short circuit
further metrics emission from the client until the next interval.
This can be problematic if it happens for a sustained number of
intervals, as our metrics aggregator will begin to age out older
metrics, and we will eventually stop emitting various types of metrics
including `nomad.client.unallocated.*` metrics.
However, when metrics collection fails on Linux, gopsutil will in many cases
(e.g cpu.Times) silently return 0 values, rather than an error.
Here, we switch to returning empty metrics in these failures, and
logging the error at the source. This brings the behaviour into line
with Linux/Unix platforms, and although making aggregation a little
sadder on intermittent failures, will result in more desireable overall
behaviour of keeping metrics available for further investigation if
things look unusual.
Adds a new Prerun and Postrun hooks to manage set up of network namespaces
on linux. Work still needs to be done to make the code platform agnostic and
support Docker style network initalization.
When an alloc runner prestart hook fails, the task runners aren't invoked
and they remain in a pending state.
This leads to terrible results, some of which are:
* Lockup in GC process as reported in https://github.com/hashicorp/nomad/pull/5861
* Lockup in shutdown process as TR.Shutdown() waits for WaitCh to be closed
* Alloc not being restarted/rescheduled to another node (as it's still in
pending state)
* Unexpected restart of alloc on a client restart, potentially days/weeks after
alloc expected start time!
Here, we treat all tasks to have failed if alloc runner prestart hook fails.
This fixes the lockups, and permits the alloc to be rescheduled on another node.
While it's desirable to retry alloc runner in such failures, I opted to treat it
out of scope. I'm afraid of some subtles about alloc and task runners and their
idempotency that's better handled in a follow up PR.
This might be one of the root causes for
https://github.com/hashicorp/nomad/issues/5840 .
This change fixes a bug where nomad would avoid running alloc tasks if
the alloc is client terminal but the server copy on the client isn't
marked as running.
Here, we fix the case by having task runner uses the
allocRunner.shouldRun() instead of only checking the server updated
alloc.
Here, we preserve much of the invariants such that `tr.Run()` is always
run, and don't change the overall alloc runner and task runner
lifecycles.
Fixes https://github.com/hashicorp/nomad/issues/5883
When a client is running against an old server (e.g. running 0.8),
`alloc.AllocatedResources` may be nil, and we need to check the
deprecated `alloc.TaskResources` instead.
Fixes https://github.com/hashicorp/nomad/issues/5810
This fixes an issue where batch and service workloads would never be
restarted due to indefinitely blocking on a nil channel.
It also raises the restoration logging message to `Info` to simplify log
analysis.
Refactoring of 104067bc2b2002a4e45ae7b667a476b89addc162
Switch the MarkLive method for a chan that is closed by the client.
Thanks to @notnoop for the idea!
The old approach called a method on most existing ARs and TRs on every
runAllocs call. The new approach does a once.Do call in runAllocs to
accomplish the same thing with less work. Able to remove the gate
abstraction that did much more than was needed.
Fixes#1795
Running restored allocations and pulling what allocations to run from
the server happen concurrently. This means that if a client is rebooted,
and has its allocations rescheduled, it may restart the dead allocations
before it contacts the server and determines they should be dead.
This commit makes tasks that fail to reattach on restore wait until the
server is contacted before restarting.
Related to #4280
This PR adds
`client.allocs.<job>.<group>.<alloc>.<task>.memory.allocated` as a gauge
in bytes to metrics to ease calculating how close a task is to OOMing.
```
'nomad.client.allocs.memory.allocated.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 268435456.000
'nomad.client.allocs.memory.cache.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 5677056.000
'nomad.client.allocs.memory.kernel_max_usage.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 0.000
'nomad.client.allocs.memory.kernel_usage.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 0.000
'nomad.client.allocs.memory.max_usage.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 8908800.000
'nomad.client.allocs.memory.rss.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 876544.000
'nomad.client.allocs.memory.swap.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 0.000
'nomad.client.allocs.memory.usage.example.cache.6d98cbaf-d6bc-2a84-c63f-bfff8905a9d8.redis.rusty': 8208384.000
```
Remove runLaunched tracking as Run is *always* called for killable
TaskRunners. TaskRunners which fail before Run can be called (during
NewTaskRunner or Restore) are not killable as they're never added to the
client's alloc map.
Builds upon earlier commit that cleans up restored handles of terminal
allocs by also emitting terminated events and calling exited hooks when
appropriate.
This commit is a significant change. TR.Run is now always executed, even
for terminal allocations. This was changed to allow TR.Run to cleanup
(run stop hooks) if a handle was recovered.
This is intended to handle the case of Nomad receiving a
DesiredStatus=Stop allocation update, persisting it, but crashing before
stopping AR/TR.
The commit also renames task runner hook data as it was very easy to
accidently set state on Requests instead of Responses using the old
field names.
Added ability to adjust the number of events the TaskRunner keeps as
there's no way to observe all events otherwise.
Task events differ slightly from 0.8 because 0.9 emits Terminated every
time a task exits instead of only when it exits on its own (not due to
restart or kill).
0.9 does not emit Killing/Killed for restarts like 0.8 which seems fine
as `Restart Signaled/Terminated/Restarting` is more descriptive.
Original v0.8 events emitted:
```
expected := []string{
"Received",
"Task Setup",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Restarting",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Restarting",
"Started",
"Restart Signaled",
"Killing",
"Killed",
"Not Restarting",
}
```
