This PR fixes the Nomad Object Namespace <-> Consul ACL Token relationship
check when using Consul OSS (or Consul ENT without namespace support).
Nomad v1.1.0 introduced a regression where Nomad would fail the validation
when submitting Connect jobs and allow_unauthenticated set to true, with
Consul OSS - because it would do the namespace check against the Consul ACL
token assuming the "default" namespace, which does not work because Consul OSS
does not have namespaces.
Instead of making the bad assumption, expand the namespace check to handle
each special case explicitly.
Fixes#10718
This PR changes Nomad's wrapper around the Consul NamespaceAPI so that
it will detect if the Consul Namespaces feature is enabled before making
a request to the Namespaces API. Namespaces are not enabled in Consul OSS,
and require a suitable license to be used with Consul ENT.
Previously Nomad would check for a 404 status code when makeing a request
to the Namespaces API to "detect" if Consul OSS was being used. This does
not work for Consul ENT with Namespaces disabled, which returns a 500.
Now we avoid requesting the namespace API altogether if Consul is detected
to be the OSS sku, or if the Namespaces feature is not licensed. Since
Consul can be upgraded from OSS to ENT, or a new license applied, we cache
the value for 1 minute, refreshing on demand if expired.
Fixes https://github.com/hashicorp/nomad-enterprise/issues/575
Note that the ticket originally describes using attributes from https://github.com/hashicorp/nomad/issues/10688.
This turns out not to be possible due to a chicken-egg situation between
bootstrapping the agent and setting up the consul client. Also fun: the
Consul fingerprinter creates its own Consul client, because there is no
[currently] no way to pass the agent's client through the fingerprint factory.
This PR implements first-class support for Nomad running Consul
Connect Mesh Gateways. Mesh gateways enable services in the Connect
mesh to make cross-DC connections via gateways, where each datacenter
may not have full node interconnectivity.
Consul docs with more information:
https://www.consul.io/docs/connect/gateways/mesh-gateway
The following group level service block can be used to establish
a Connect mesh gateway.
service {
connect {
gateway {
mesh {
// no configuration
}
}
}
}
Services can make use of a mesh gateway by configuring so in their
upstream blocks, e.g.
service {
connect {
sidecar_service {
proxy {
upstreams {
destination_name = "<service>"
local_bind_port = <port>
datacenter = "<datacenter>"
mesh_gateway {
mode = "<mode>"
}
}
}
}
}
}
Typical use of a mesh gateway is to create a bridge between datacenters.
A mesh gateway should then be configured with a service port that is
mapped from a host_network configured on a WAN interface in Nomad agent
config, e.g.
client {
host_network "public" {
interface = "eth1"
}
}
Create a port mapping in the group.network block for use by the mesh
gateway service from the public host_network, e.g.
network {
mode = "bridge"
port "mesh_wan" {
host_network = "public"
}
}
Use this port label for the service.port of the mesh gateway, e.g.
service {
name = "mesh-gateway"
port = "mesh_wan"
connect {
gateway {
mesh {}
}
}
}
Currently Envoy is the only supported gateway implementation in Consul.
By default Nomad client will run the latest official Envoy docker image
supported by the local Consul agent. The Envoy task can be customized
by setting `meta.connect.gateway_image` in agent config or by setting
the `connect.sidecar_task` block.
Gateways require Consul 1.8.0+, enforced by the Nomad scheduler.
Closes#9446
This PR adds e2e tests for Consul Namespaces for Nomad Enterprise
with Consul ACLs enabled.
Needed to add support for Consul ACL tokens with `namespace` and
`namespace_prefix` blocks, which Nomad parses and validates before
tossing the token. These bits will need to be picked back to OSS.
(cherry-picked from ent without _ent things)
This is part 2/4 of e2e tests for Consul Namespaces. Took a
first pass at what the parameterized tests can look like, but
only on the ENT side for this PR. Will continue to refactor
in the next PRs.
Also fixes 2 bugs:
- Config Entries registered by Nomad Server on job registration
were not getting Namespace set
- Group level script checks were not getting Namespace set
Those changes will need to be copied back to Nomad OSS.
Nomad OSS + no ACLs (previously, needs refactor)
Nomad ENT + no ACLs (this)
Nomad OSS + ACLs (todo)
Nomad ENT + ALCs (todo)
Consul allows specifying the HTTP body to send in a health check. Nomad
uses Consul for health checking so this just plumbs the value through to
where the Consul API is called.
There is no validation that `body` is not used with an incompatible
check method like GET.
This PR adds the common OSS changes for adding support for Consul Namespaces,
which is going to be a Nomad Enterprise feature. There is no new functionality
provided by this changeset and hopefully no new bugs.
* Fixup uses of `sanity`
* Remove unnecessary comments.
These checks are better explained by earlier comments about
the context of the test. Per @tgross, moved the tests together
to better reinforce the overall shared context.
* Update nomad/fsm_test.go
This PR fixes a bug where sidecar services would be re-registered into Consul every ~30
seconds, caused by the parent service having its tags field set and the sidecar_service
tags unset. Nomad would directly compare the tags between its copy of the sidecar service
definition and the tags of the sidecar service reported by Consul. This does not work,
because Consul will under-the-hood set the sidecar service tags to inherit the parent
service tags if the sidecar service tags are unset. The comparison then done by Nomad
would not match, if the parent sidecar tags are set.
Fixes#10025
Allow for readiness type checks by configuring nomad to ignore warnings
or errors reported by a service check. This allows the deployment to
progress and while Consul handles introducing the sercive into a
resource pool once the check passes.
This PR implements Nomad built-in support for running Consul Connect
terminating gateways. Such a gateway can be used by services running
inside the service mesh to access "legacy" services running outside
the service mesh while still making use of Consul's service identity
based networking and ACL policies.
https://www.consul.io/docs/connect/gateways/terminating-gateway
These gateways are declared as part of a task group level service
definition within the connect stanza.
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
terminating {
// terminating-gateway configuration entry
}
}
}
}
Currently Envoy is the only supported gateway implementation in
Consul. The gateay task can be customized by configuring the
connect.sidecar_task block.
When the gateway.terminating field is set, Nomad will write/update
the Configuration Entry into Consul on job submission. Because CEs
are global in scope and there may be more than one Nomad cluster
communicating with Consul, there is an assumption that any terminating
gateway defined in Nomad for a particular service will be the same
among Nomad clusters.
Gateways require Consul 1.8.0+, checked by a node constraint.
Closes#9445
This removes modification of ops in methods that UpdateWorkload calls, keeping
them local to UpdateWorkload. It also includes some rewrites of checkRegs for
clarity.
Submitting a job with an ingress gateway in host networking mode
with an absent gateway.proxy block would cause the Nomad client
to panic on NPE.
The consul registration bits would assume the proxy stanza was
not nil, but it could be if the user does not supply any manually
configured envoy proxy settings.
Check the proxy field is not nil before using it.
Fixes#9669
Before, upstreams could only be defined using the default datacenter.
Now, the `datacenter` field can be set in a connect upstream definition,
informing consul of the desire for an instance of the upstream service
in the specified datacenter. The field is optional and continues to
default to the local datacenter.
Closes#8964
Previously, connect sidecars would be re-registered with consul every cycle
of Nomad's reconciliation loop around Consul service registrations. This is
because part of the comparison used `reflect.DeepEqual` on []string objects,
which returns false when one object is `[]string{}` and the other is `[]string{}(nil)`.
Unforunately, this was always the case, and every Connect sidecar service
would be re-registered on every iteration, which happens every 30 seconds.
* consul: advertise cni and multi host interface addresses
* structs: add service/check address_mode validation
* ar/groupservices: fetch networkstatus at hook runtime
* ar/groupservice: nil check network status getter before calling
* consul: comment network status can be nil
As newer versions of Consul are released, the minimum version of Envoy
it supports as a sidecar proxy also gets bumped. Starting with the upcoming
Consul v1.9.X series, Envoy v1.11.X will no longer be supported. Current
versions of Nomad hardcode a version of Envoy v1.11.2 to be used as the
default implementation of Connect sidecar proxy.
This PR introduces a change such that each Nomad Client will query its
local Consul for a list of Envoy proxies that it supports (https://github.com/hashicorp/consul/pull/8545)
and then launch the Connect sidecar proxy task using the latest supported version
of Envoy. If the `SupportedProxies` API component is not available from
Consul, Nomad will fallback to the old version of Envoy supported by old
versions of Consul.
Setting the meta configuration option `meta.connect.sidecar_image` or
setting the `connect.sidecar_task` stanza will take precedence as is
the current behavior for sidecar proxies.
Setting the meta configuration option `meta.connect.gateway_image`
will take precedence as is the current behavior for connect gateways.
`meta.connect.sidecar_image` and `meta.connect.gateway_image` may make
use of the special `${NOMAD_envoy_version}` variable interpolation, which
resolves to the newest version of Envoy supported by the Consul agent.
Addresses #8585#7665
When deregistering a service, consul also deregisters the associated
checks. The current state keeps track of all services and all checks
separately and deregisters them in sequence, which leads, whether during
syncs or shutdowns, to check deregistrations happening twice and failing
the second time (generating errors in logs)
This fix includes:
- a fix to the sync logic that just pulls the checks *after* the
services have been synced
- a fix to the shutdown mechanism that gets an updated list of checks
after deregistering the services, so that we get a cleaner check
deregistration process.
This PR adds initial support for running Consul Connect Ingress Gateways (CIGs) in Nomad. These gateways are declared as part of a task group level service definition within the connect stanza.
```hcl
service {
connect {
gateway {
proxy {
// envoy proxy configuration
}
ingress {
// ingress-gateway configuration entry
}
}
}
}
```
A gateway can be run in `bridge` or `host` networking mode, with the caveat that host networking necessitates manually specifying the Envoy admin listener (which cannot be disabled) via the service port value.
Currently Envoy is the only supported gateway implementation in Consul, and Nomad only supports running Envoy as a gateway using the docker driver.
Aims to address #8294 and tangentially #8647
This change adds the ability to set the fields `success_before_passing` and
`failures_before_critical` on Consul service check definitions. This is a
feature added to Consul v1.7.0 and later.
https://www.consul.io/docs/agent/checks#success-failures-before-passing-critical
Nomad doesn't do much besides pass the fields through to Consul.
Fixes#6913
This PR adds the capability of running Connect Native Tasks on Nomad,
particularly when TLS and ACLs are enabled on Consul.
The `connect` stanza now includes a `native` parameter, which can be
set to the name of task that backs the Connect Native Consul service.
There is a new Client configuration parameter for the `consul` stanza
called `share_ssl`. Like `allow_unauthenticated` the default value is
true, but recommended to be disabled in production environments. When
enabled, the Nomad Client's Consul TLS information is shared with
Connect Native tasks through the normal Consul environment variables.
This does NOT include auth or token information.
If Consul ACLs are enabled, Service Identity Tokens are automatically
and injected into the Connect Native task through the CONSUL_HTTP_TOKEN
environment variable.
Any of the automatically set environment variables can be overridden by
the Connect Native task using the `env` stanza.
Fixes#6083
