On Windows, the `os.Process.Signal` method returns an error when sending
`os.Interrupt` (SIGINT) because it isn't implemented. This causes test servers
in the `testutil` packages to break on Windows. Use the platform specific
syscalls to generate the SIGINT instead.
The agent's signal handler also did not correctly handle the Ctrl-C because we
were masking os.Interrupt instead of SIGINT.
Fixes: https://github.com/hashicorp/nomad/issues/26775
Co-authored-by: Chris Roberts <croberts@hashicorp.com>
As of April 1, Docker Hub rate limits tightened. With only 10 pulls/hr/IP, we're
likely to encounter test failures. Switch all Docker images getting pulled from
this repository to use the HashiCorp managed registry mirror.
Note that most of our tests in `drivers/docker` don't pull from the remote
registry but load a local image, while others will need to pull from the remote
and fetch different images depending on OS/arch. Refactor the definition of test
task configuration to make it clear which is which, and de-factor some false
sharing of setup functions.
Updates the E2E tests to use that registry by configuring the Docker
daemon. This required changing out a few container images that we don't have in
the registry, but these new images are all smaller. There are a couple of tests
that still use explicitly-tagged `docker.io` images or other third-party
registries, which have been left in place.
Ref: https://hashicorp.atlassian.net/browse/NET-12233
update E2E images to those in the registry mirror
fix windows and docklog test build
fix stopsignal test
mop-up
more mop-up
The legacy workflow for Vault whereby servers were configured
using a token to provide authentication to the Vault API has now
been removed. This change also removes the workflow where servers
were responsible for deriving Vault tokens for Nomad clients.
The deprecated Vault config options used byi the Nomad agent have
all been removed except for "token" which is still in use by the
Vault Transit keyring implementation.
Job specification authors can no longer use the "vault.policies"
parameter and should instead use "vault.role" when not using the
default workload identity.
---------
Co-authored-by: Tim Gross <tgross@hashicorp.com>
Co-authored-by: Aimee Ukasick <aimee.ukasick@hashicorp.com>
In #23838 we updated the `Node.Update` RPC handler we use for heartbeats to be
more strict about requiring node secrets. But when a node goes down, it's the
leader that sends the request to mark the node down via `Node.Update` (to
itself), and this request was missing the leader ACL needed to authenticate to
itself.
Add the leader ACL to the request and update the RPC handler test for
disconnected-clients to use ACLs, which would have detected this bug. Also added
a note to the `Authenticate` comment about how that authentication path requires
the leader ACL.
Fixes: https://github.com/hashicorp/nomad/issues/24231
Ref: https://hashicorp.atlassian.net/browse/NET-11384
Although we encourage users to use Vault roles, sometimes they're going to want
to assign policies based on entity and pre-create entities and aliases based on
claims. This allows them to use single default role (or at least small number of
them) that has a templated policy, but have an escape hatch from that.
When defining Vault entities the `user_claim` must be unique. When writing Vault
binding rules for use with Nomad workload identities the binding rule won't be
able to create a 1:1 mapping because the selector language allows accessing only
a single field. The `nomad_job_id` claim isn't sufficient to uniquely identify a
job because of namespaces. It's possible to create a JWT auth role with
`bound_claims` to avoid this becoming a security problem, but this doesn't allow
for correct accounting of user claims.
Add support for an `extra_claims` block on the server's `default_identity`
blocks for Vault. This allows a cluster administrator to add a custom claim on
all allocations. The values for these claims are interpolatable with a limited
subset of fields, similar to how we interpolate the task environment.
Fixes: https://github.com/hashicorp/nomad/issues/23510
Ref: https://hashicorp.atlassian.net/browse/NET-10372
Ref: https://hashicorp.atlassian.net/browse/NET-10387
CSI volumes are namespaced. But the client does not include the namespace in the
staging mount path. This causes CSI volumes with the same volume ID but
different namespace to collide if they happen to be placed on the same host. The
per-allocation paths don't need to be namespaced, because an allocation can only
mount volumes from its job's own namespace.
Rework the CSI hook tests to have more fine-grained control over the mock
on-disk state. Add tests covering upgrades from staging paths missing
namespaces.
Fixes: https://github.com/hashicorp/nomad/issues/18741
* tests: swap testify for test in plugins/csi/client_test.go
* tests: swap testify for test in testutil/
* tests: swap testify for test in host_test.go
* tests: swap testify for test in plugin_test.go
* tests: swap testify for test in utils_test.go
* tests: swap testify for test in scheduler/
* tests: swap testify for test in parse_test.go
* tests: swap testify for test in attribute_test.go
* tests: swap testify for test in plugins/drivers/
* tests: swap testify for test in command/
* tests: fixup some test usages
* go: run go mod tidy
* windows: cpuset test only on linux
When an allocation can't be placed because of a port collision the
resulting blocked eval is expected to have a metric reporting the port
that caused the conflict, but this metrics was not being emitted when
preemption was enabled.
OIDC mandates the support of the RS256 signing algorithm so in order to maximize workload identity's usefulness this change switches from using the EdDSA signing algorithm to RS256.
Old keys will continue to use EdDSA but new keys will use RS256. The EdDSA generation code was left in place because it's fast and cheap and I'm not going to lie I hope we get to use it again.
**Test Updates**
Most of our Variables and Keyring tests had a subtle assumption in them that the keyring would be initialized by the time the test server had elected a leader. ed25519 key generation is so fast that the fact that it was happening asynchronously with server startup didn't seem to cause problems. Sadly rsa key generation is so slow that basically all of these tests failed.
I added a new `testutil.WaitForKeyring` helper to replace `testutil.WaitForLeader` in cases where the keyring must be initialized before the test may continue. However this is mostly used in the `nomad/` package.
In the `api` and `command/agent` packages I decided to switch their helpers to wait for keyring initialization by default. This will slow down tests a bit, but allow those packages to not be as concerned with subtle server readiness details. On my machine rsa key generation takes 63ms, so hopefully the difference isn't significant on CI runners.
**TODO**
- Docs and changelog entries.
- Upgrades - right now upgrades won't get RS256 keys until their root key rotates either manually or after ~30 days.
- Observability - I'm not sure there's a way for operators to see if they're using EdDSA or RS256 unless they inspect a key. The JWKS endpoint can be inspected to see if EdDSA will be used for new identities, but it doesn't technically define which key is active. If upgrades can be fixed to automatically rotate keys, we probably don't need to worry about this.
**Requiem for ed25519**
When workload identities were first implemented we did not immediately consider OIDC compliance. Consul, Vault, and many other third parties support JWT auth methods without full OIDC compliance. For the machine<-->machine use cases workload identity is intended to fulfill, OIDC seemed like a bigger risk than asset.
EdDSA/ed25519 is the signing algorithm we chose for workload identity JWTs because of all these lovely properties:
1. Deterministic keys that can be derived from our preexisting root keys. This was perhaps the biggest factor since we already had a root encryption key around from which we could derive a signing key.
2. Wonderfully compact: 64 byte private key, 32 byte public key, 64 byte signatures. Just glorious.
3. No parameters. No choices of encodings. It's all well-defined by [RFC 8032](https://datatracker.ietf.org/doc/html/rfc8032).
4. Fastest performing signing algorithm! We don't even care that much about the performance of our chosen algorithm, but what a free bonus!
5. Arguably one of the most secure signing algorithms widely available. Not just from a cryptanalysis perspective, but from an API and usage perspective too.
Life was good with ed25519, but sadly it could not last.
[IDPs](https://en.wikipedia.org/wiki/Identity_provider), such as AWS's IAM OIDC Provider, love OIDC. They have OIDC implemented for humans, so why not reuse that OIDC support for machines as well? Since OIDC mandates RS256, many implementations don't bother implementing other signing algorithms (or at least not advertising their support). A quick survey of OIDC Discovery endpoints revealed only 2 out of 10 OIDC providers advertised support for anything other than RS256:
- [PayPal](https://www.paypalobjects.com/.well-known/openid-configuration) supports HS256
- [Yahoo](https://api.login.yahoo.com/.well-known/openid-configuration) supports ES256
RS256 only:
- [GitHub](https://token.actions.githubusercontent.com/.well-known/openid-configuration)
- [GitLab](https://gitlab.com/.well-known/openid-configuration)
- [Google](https://accounts.google.com/.well-known/openid-configuration)
- [Intuit](https://developer.api.intuit.com/.well-known/openid_configuration)
- [Microsoft](https://login.microsoftonline.com/fabrikamb2c.onmicrosoft.com/v2.0/.well-known/openid-configuration)
- [SalesForce](https://login.salesforce.com/.well-known/openid-configuration)
- [SimpleLogin (acquired by ProtonMail)](https://app.simplelogin.io/.well-known/openid-configuration/)
- [TFC](https://app.terraform.io/.well-known/openid-configuration)
The `BindName` for JWT authentication should always bind to the `nomad_service` field in the JWT and not include the namespace, as the `nomad_service` is what's actually registered in Consul.
* Fix the binding rule for the `consulcompat` test
* Add a reachability assertion so that we don't miss regressions.
* Ensure we have a clean shutdown so that we don't leak state (containers and iptables) between tests.
Set up a new test suite that exercises Nomad's compatibility with Consul. This
suite installs all currently supported versions of Consul, spins up a Consul
agent with appropriate configuration, and a Nomad agent running in dev
mode. Then it runs a Connect job against each pair.
Some of our `api` package tests have ACLs enabled, but none of those tests also
run clients and the "wait for the clients to be live" code reads from the Node
API. The caller can't bootstrap ACLs until `NewTestServer` returns, and this
makes for a circular dependency.
Allow developers to provide a bootstrap token to the test server config, and
if it's available, have the server bootstrap the ACL system with it before
checking for live clients.
* vault: update identity name to start with `vault_`
In the original proposal, workload identities used to derive Vault
tokens were expected to be called just `vault`. But in order to support
multiple Vault clusters it is necessary to associate identities with
specific Vault cluster configuration.
This commit implements a new proposal to have Vault identities named as
`vault_<cluster>`.
and MockCSIManager to support the call counting
that csi_hook_test expects
instead of implementing csimanager
interfaces in two separate places:
* client/allocrunner/csi_hook_test
* client/csi_endpoint_test
they can both use the same mocks defined in
client/pluginmanager/csimanager/
alongside the actual implementations of them.
also refactor TestCSINode_DetachVolume
to use use it like Node_ExpandVolume
so we can also test the happy path there
Add fingerprinting we'll need to accept multiple Vault clusters in upcoming
Nomad Enterprise features. The fingerprinter will create a map of Vault clients
by cluster name. In Nomad CE, all but the default cluster will be ignored and
there will be no visible behavior change.
6747ef8803 fixes the Nomad client to support using the raw_exec
driver while running as a non-root user. Remove the use of sudo
in the test-e2e workflow for running integration (vaultcompat)
tests.
* "allow" (don't try to drop) linux capabilities
in the docker test driver harness (see #15181)
* refactor to allow different busybox images
since windows containers need to be the same
version as the underlying OS, and we're
moving from 2016 to 2019
* one docker test was flaky from apparently
being a bit slower on windows, so add Wait()
to avoid leaking task resources (e.g. containers,
iptables) if allocRunner prerun fails during
restore on client restart.
now if prerun fails, TaskRunner.MarkFailedKill()
will only emit an event, mark the task as failed,
and cancel the tr's killCtx, so then ar.runTasks()
-> tr.Run() can take care of the actual cleanup.
removed from (formerly) tr.MarkFailedDead(),
now handled by tr.Run():
* set task state as dead
* save task runner local state
* task stop hooks
also done in tr.Run() now that it's not skipped:
* handleKill() to kill tasks while respecting
their shutdown delay, and retrying as needed
* also includes task preKill hooks
* clearDriverHandle() to destroy the task
and associated resources
* task exited hooks
Fixes#16517
Given a 3 Server cluster with at least 1 Client connected to Follower 1:
If a NodeMeta.{Apply,Read} for the Client request is received by
Follower 1 with `AllowStale = false` the Follower will forward the
request to the Leader.
The Leader, not being connected to the target Client, will forward the
RPC to Follower 1.
Follower 1, seeing AllowStale=false, will forward the request to the
Leader.
The Leader, not being connected to... well hoppefully you get the
picture: an infinite loop occurs.
This change resolves policies for workload identities when calling Client RPCs. Previously only ACL tokens could be used for Client RPCs.
Since the same cache is used for both bearer tokens (ACL and Workload ID), the token cache size was doubled.
---------
Co-authored-by: James Rasell <jrasell@users.noreply.github.com>
When a Nomad client that is running an allocation with
`max_client_disconnect` set misses a heartbeat the Nomad server will
update its status to `disconnected`.
Upon reconnecting, the client will make three main RPC calls:
- `Node.UpdateStatus` is used to set the client status to `ready`.
- `Node.UpdateAlloc` is used to update the client-side information about
allocations, such as their `ClientStatus`, task states etc.
- `Node.Register` is used to upsert the entire node information,
including its status.
These calls are made concurrently and are also running in parallel with
the scheduler. Depending on the order they run the scheduler may end up
with incomplete data when reconciling allocations.
For example, a client disconnects and its replacement allocation cannot
be placed anywhere else, so there's a pending eval waiting for
resources.
When this client comes back the order of events may be:
1. Client calls `Node.UpdateStatus` and is now `ready`.
2. Scheduler reconciles allocations and places the replacement alloc to
the client. The client is now assigned two allocations: the original
alloc that is still `unknown` and the replacement that is `pending`.
3. Client calls `Node.UpdateAlloc` and updates the original alloc to
`running`.
4. Scheduler notices too many allocs and stops the replacement.
This creates unnecessary placements or, in a different order of events,
may leave the job without any allocations running until the whole state
is updated and reconciled.
To avoid problems like this clients must update _all_ of its relevant
information before they can be considered `ready` and available for
scheduling.
To achieve this goal the RPC endpoints mentioned above have been
modified to enforce strict steps for nodes reconnecting:
- `Node.Register` does not set the client status anymore.
- `Node.UpdateStatus` sets the reconnecting client to the `initializing`
status until it successfully calls `Node.UpdateAlloc`.
These changes are done server-side to avoid the need of additional
coordination between clients and servers. Clients are kept oblivious of
these changes and will keep making these calls as they normally would.
The verification of whether allocations have been updates is done by
storing and comparing the Raft index of the last time the client missed
a heartbeat and the last time it updated its allocations.
* vault: configure user agent on Nomad vault clients
This PR attempts to set the User-Agent header on each Vault API client
created by Nomad. Still need to figure a way to set User-Agent on the
Vault client created internally by consul-template.
* vault: fixup find-and-replace gone awry
Clients periodically fingerprint Vault and Consul to ensure the server has
updated attributes in the client's fingerprint. If the client can't reach
Vault/Consul, the fingerprinter clears the attributes and requires a node
update. Although this seems like correct behavior so that we can detect
intentional removal of Vault/Consul access, it has two serious failure modes:
(1) If a local Consul agent is restarted to pick up configuration changes and the
client happens to fingerprint at that moment, the client will update its
fingerprint and result in evaluations for all its jobs and all the system jobs
in the cluster.
(2) If a client loses Vault connectivity, the same thing happens. But the
consequences are much worse in the Vault case because Vault is not run as a
local agent, so Vault connectivity failures are highly correlated across the
entire cluster. A 15 second Vault outage will cause a new `node-update`
evalution for every system job on the cluster times the number of nodes, plus
one `node-update` evaluation for every non-system job on each node. On large
clusters of 1000s of nodes, we've seen this create a large backlog of evaluations.
This changeset updates the fingerprinting behavior to keep the last fingerprint
if Consul or Vault queries fail. This prevents a storm of evaluations at the
cost of requiring a client restart if Consul or Vault is intentionally removed
from the client.
* scheduler: stopped-yet-running allocs are still running
* scheduler: test new stopped-but-running logic
* test: assert nonoverlapping alloc behavior
Also add a simpler Wait test helper to improve line numbers and save few
lines of code.
* docs: tried my best to describe #10446
it's not concise... feedback welcome
* scheduler: fix test that allowed overlapping allocs
* devices: only free devices when ClientStatus is terminal
* test: output nicer failure message if err==nil
Co-authored-by: Mahmood Ali <mahmood@hashicorp.com>
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
* test: use `T.TempDir` to create temporary test directory
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix TestLogmon_Start_restart on Windows
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix failing TestConsul_Integration
t.TempDir fails to perform the cleanup properly because the folder is
still in use
testing.go:967: TempDir RemoveAll cleanup: unlinkat /tmp/TestConsul_Integration2837567823/002/191a6f1a-5371-cf7c-da38-220fe85d10e5/web/secrets: device or resource busy
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This PR upgrades our CI images and fixes some affected tests.
- upgrade go-machine-image to premade latest ubuntu LTS (ubuntu-2004:202111-02)
- eliminate go-machine-recent-image (no longer necessary)
- manage GOPATH in GNUMakefile (see https://discuss.circleci.com/t/gopath-is-set-to-multiple-directories/7174)
- fix tcp dial error check (message seems to be OS specific)
- spot check values measured instead of specifically 'RSS' (rss no longer reported in cgroups v2)
- use safe MkdirTemp for generating tmpfiles
NOT applied: (too flakey)
- eliminate setting GOMAXPROCS=1 (build tools were also affected by this setting)
- upgrade resource type for all imanges to large (2C -> 4C)
* debug: refactor Consul API collection
* debug: refactor Vault API collection
* debug: cleanup test timing
* debug: extend test to multiregion
* debug: save cmdline flags in bundle
* debug: add cli version to output
* Add changelog entry
* Include region and namespace in CLI output
* Add region and prefix matching for server members
* Add namespace and region API outputs to cluster metadata folder
* Add region awareness to WaitForClient helper function
* Add helper functions for SliceStringHasPrefix and StringHasPrefixInSlice
* Refactor test client agent generation
* Add tests for region
* Add changelog
