This allows users to set a custom value of attempts that will be made to purge
an existing (not running) container if one is found during task creation.
---------
Co-authored-by: Tim Gross <tgross@hashicorp.com>
No functional changes, just cleaning up deprecated usages that are
removed in v2 and replace one call of .Slice with .ForEach to avoid
making the intermediate copy.
* drivers: plumb hardware topology via grpc into drivers
This PR swaps out the temporary use of detecting system hardware manually
in each driver for using the Client's detected topology by plumbing the
data over gRPC. This ensures that Client configuration is taken to account
consistently in all references to system topology.
* cr: use enum instead of bool for core grade
* cr: fix test slit tables to be possible
* client: refactor cpuset partitioning
This PR updates the way Nomad client manages the split between tasks
that make use of resources.cpus vs. resources.cores.
Previously, each task was explicitly assigned which CPU cores they were
able to run on. Every time a task was started or destroyed, all other
tasks' cpusets would need to be updated. This was inefficient and would
crush the Linux kernel when a client would try to run ~400 or so tasks.
Now, we make use of cgroup heirarchy and cpuset inheritence to efficiently
manage cpusets.
* cr: tweaks for feedback
cgroupslib.MaybeDisableMemorySwappiness returned an incorrect type, and was
incorrectly typecast to int64 causing a panic on non-linux and non-windows hosts.
We use capped exponential backoff in several places in the code when handling
failures. The code we've copy-and-pasted all over has a check to see if the
backoff is greater than the limit, but this check happens after the bitshift and
we always increment the number of attempts. This causes an overflow with a
fairly small number of failures (ex. at one place I tested it occurs after only
24 iterations), resulting in a negative backoff which then never recovers. The
backoff becomes a tight loop consuming resources and/or DoS'ing a Nomad RPC
handler or an external API such as Vault. Note this doesn't occur in places
where we cap the number of iterations so the loop breaks (usually to return an
error), so long as the number of iterations is reasonable.
Introduce a helper with a check on the cap before the bitshift to avoid overflow in all
places this can occur.
Fixes: #18199
Co-authored-by: stswidwinski <stan.swidwinski@gmail.com>
* drivers/docker: refactor use of clients in docker driver
This PR refactors how we manage the two underlying clients used by the
docker driver for communicating with the docker daemon. We keep two clients
- one with a hard-coded timeout that applies to all operations no matter
what, intended for use with short lived / async calls to docker. The other
has no timeout and is the responsibility of the caller to set a context
that will ensure the call eventually terminates.
The use of these two clients has been confusing and mistakes were made
in a number of places where calls were making use of the wrong client.
This PR makes it so that a user must explicitly call a function to get
the client that makes sense for that use case.
Fixes#17023
* cr: followup items
This PR fixes a bug where the docker network pause container would not be
stopped and removed in the case where a node is restarted, the alloc is
moved to another node, the node comes back up. See the issue below for
full repro conditions.
Basically in the DestroyNetwork PostRun hook we would depend on the
NetworkIsolationSpec field not being nil - which is only the case
if the Client stays alive all the way from network creation to network
teardown. If the node is rebooted we lose that state and previously
would not be able to find the pause container to remove. Now, we manually
find the pause container by scanning them and looking for the associated
allocID.
Fixes#17299
Some Nomad users ship application logs out-of-band via syslog. For these users
having `logmon` (and `docker_logger`) running is unnecessary overhead. Allow
disabling the logmon and pointing the task's stdout/stderr to /dev/null.
This changeset is the first of several incremental improvements to log
collection short of full-on logging plugins. The next step will likely be to
extend the internal-only task driver configuration so that cluster
administrators can turn off log collection for the entire driver.
---
Fixes: #11175
Co-authored-by: Thomas Weber <towe75@googlemail.com>
When we added recovery of pause containers in #16352 we called the recovery
function from the plugin factory function. But in our plugin setup protocol, a
plugin isn't ready for use until we call `SetConfig`. This meant that
recovering pause containers was always done with the default
config. Setting up the Docker client only happens once, so setting the wrong
config in the recovery function also means that all other Docker API calls will
use the default config.
Move the `recoveryPauseContainers` call into the `SetConfig`. Fix the error
handling so that we return any error but also don't log when the context is
canceled, which happens twice during normal startup as we fingerprint the
driver.
* Update ioutil library references to os and io respectively for drivers package
No user facing changes so I assume no change log is required
* Fix failing tests
This test exercises upgrades between 0.8 and Nomad versions greater
than 0.9. We have not supported 0.8.x in a very long time and in any
case the test has been marked to skip because the downloader doesn't
work.
This PR introduces support for using Nomad on systems with cgroups v2 [1]
enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux
distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems
for Nomad users.
Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer,
but not so for managing cpuset cgroups. Before, Nomad has been making use of
a feature in v1 where a PID could be a member of more than one cgroup. In v2
this is no longer possible, and so the logic around computing cpuset values
must be modified. When Nomad detects v2, it manages cpuset values in-process,
rather than making use of cgroup heirarchy inheritence via shared/reserved
parents.
Nomad will only activate the v2 logic when it detects cgroups2 is mounted at
/sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2
mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to
use the v1 logic, and should operate as before. Systems that do not support
cgroups v2 are also not affected.
When v2 is activated, Nomad will create a parent called nomad.slice (unless
otherwise configured in Client conifg), and create cgroups for tasks using
naming convention <allocID>-<task>.scope. These follow the naming convention
set by systemd and also used by Docker when cgroups v2 is detected.
Client nodes now export a new fingerprint attribute, unique.cgroups.version
which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by
Nomad.
The new cpuset management strategy fixes#11705, where docker tasks that
spawned processes on startup would "leak". In cgroups v2, the PIDs are
started in the cgroup they will always live in, and thus the cause of
the leak is eliminated.
[1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.htmlCloses#11289Fixes#11705#11773#11933
In Nomad 1.1.1 we generate a hosts file based on the Nomad-owned network
namespace, rather than using the default hosts file from the pause
container. This hosts file should be shared between tasks in the same
allocation so that tasks can update the file and have the results propagated
between tasks.
When `network.mode = "bridge"`, we create a pause container in Docker with no
networking so that we have a process to hold the network namespace we create
in Nomad. The default `/etc/hosts` file of that pause container is then used
for all the Docker tasks that share that network namespace. Some applications
rely on this file being populated.
This changeset generates a `/etc/hosts` file and bind-mounts it to the
container when Nomad owns the network, so that the container's hostname has an
IP in the file as expected. The hosts file will include the entries added by
the Docker driver's `extra_hosts` field.
In this changeset, only the Docker task driver will take advantage of this
option, as the `exec`/`java` drivers currently copy the host's `/etc/hosts`
file and this can't be changed without breaking backwards compatibility. But
the fields are available in the task driver protobuf for community task
drivers to use if they'd like.
This changeset does not introduce any functional change for the
docker driver, but rather cleans up the implementation around
computing configured capabilities by re-using code written for
the exec/java task drivers.
The default Linux Capabilities set enabled by the docker, exec, and
java task drivers includes CAP_NET_RAW (for making ping just work),
which has the side affect of opening an ARP DoS/MiTM attack between
tasks using bridge networking on the same host network.
https://docs.docker.com/engine/reference/run/#runtime-privilege-and-linux-capabilities
This PR disables CAP_NET_RAW for the docker, exec, and java task
drivers. The previous behavior can be restored for docker using the
allow_caps docker plugin configuration option.
A future version of nomad will enable similar configurability for the
exec and java task drivers.
This fixes a bug where Nomad overrides a Dockerfile's STOPSIGNAL with
the default kill_signal (SIGTERM).
This adds a check for kill_signal. If it's not set, it calls
StopContainer instead of Signal, which uses STOPSIGNAL if it's
specified. If both kill_signal and STOPSIGNAL are set, Nomad tries to
stop the container with kill_signal first, before then calling
StopContainer.
Fixes#9989
Introduce a new more-block friendly syntax for specifying mounts with a new `mount` block type with the target as label:
```hcl
config {
image = "..."
mount {
type = "..."
target = "target-path"
volume_options { ... }
}
}
```
The main benefit here is that by `mount` being a block, it can nest blocks and avoids the compatibility problems noted in https://github.com/hashicorp/nomad/pull/9634/files#diff-2161d829655a3a36ba2d916023e4eec125b9bd22873493c1c2e5e3f7ba92c691R128-R155 .
The intention is for us to promote this `mount` blocks and quietly deprecate the `mounts` type, while still honoring to preserve compatibility as much as we could.
This addresses the issue in https://github.com/hashicorp/nomad/issues/9604 .
When the Docker driver kills as task, we send a request via the Docker API for
dockerd to fire the signal. We send that signal and then block for the
`kill_timeout` waiting for the container to exit. But if the Docker API
blocks, we will block indefinitely because we haven't configured the API call
with the same timeout.
This changeset is a minimal intervention to add the timeout to the Docker API
call _only_ when we have the `kill_timeout` set. Future work should examine
whether we should be threading contexts through other `go-dockerclient` API
calls.
The default behavior for `docker.volumes.enabled` is intended to be `false`,
but the HCL schema defaults to `true` if the value is unset. Set the default
literal value to `true`.
Additionally, Docker driver mounts of type "volume" (but not "bind") are not
being properly sandboxed with that setting. Disable Docker mounts with type
"volume" entirely whenever the `docker.volumes.enabled` flag is set to
false. Note this is unrelated to the `volume_mount` feature, which is
constrained to preconfigured host volumes or whatever is mounted by a CSI
plugin.
This changeset includes updates to unit tests that should have been failing
under the documented behavior but were not.
This PR adds a version specific upgrade note about the docker stop
signal behavior. Also adds test for the signal logic in docker driver.
Closes#8932 which was fixed in #8933
