On supported platforms, the secrets directory is a 1MiB tmpfs. But some tasks
need larger space for downloading large secrets. This is especially the case for
tasks using `templates`, which need extra room to write a temporary file to the
secrets directory that gets renamed to the old file atomically.
This changeset allows increasing the size of the tmpfs in the `resources`
block. Because this is a memory resource, we need to include it in the memory we
allocate for scheduling purposes. The task is already prevented from using more
memory in the tmpfs than the `resources.memory` field allows, but can bypass
that limit by writing to the tmpfs via `template` or `artifact` blocks.
Therefore, we need to account for the size of the tmpfs in the allocation
resources. Simply adding it to the memory needed when we create the allocation
allows it to be accounted for in all downstream consumers, and then we'll
subtract that amount from the memory resources just before configuring the task
driver.
For backwards compatibility, the default value of 1MiB is "free" and ignored by
the scheduler. Otherwise we'd be increasing the allocated resources for every
existing alloc, which could cause problems across upgrades. If a user explicitly
sets `resources.secrets = 1` it will no longer be free.
Fixes: https://github.com/hashicorp/nomad/issues/2481
Ref: https://hashicorp.atlassian.net/browse/NET-10070
* exec2: add client support for unveil filesystem isolation mode
This PR adds support for a new filesystem isolation mode, "Unveil". The
mode introduces a "alloc_mounts" directory where tasks have user-owned
directory structure which are bind mounts into the real alloc directory
structure. This enables a task driver to use landlock (and maybe the
real unveil on openbsd one day) to isolate a task to the task owned
directory structure, providing sandboxing.
* actually create alloc-mounts-dir directory
* fix doc strings about alloc mount dir paths
When agents start, they create a shared Consul client that is then wrapped as
various interfaces for testability, and used in constructing the Nomad client
and server. The interfaces that support workload services (rather than the Nomad
agent itself) need to support multiple Consul clusters for Nomad
Enterprise. Update these interfaces to be factory functions that return the
Consul client for a given cluster name. Update the `ServiceClient` to split
workload updates between clusters by creating a wrapper around all the clients
that delegates to the cluster-specific `ServiceClient`.
Ref: https://github.com/hashicorp/team-nomad/issues/404
This PR does some cleanup of an old code path for versions of Consul that
did not support reporting the supported versions of Envoy in its API. Those
versions are no longer supported for years at this point, and the fallback
version of envoy hasn't been supported by any version of Consul for almost
as long. Remove this code path that is no longer useful.
This PR modifies references to the envoyproxy/envoy docker image to
explicitly include the docker.io prefix. This does not affect existing
users, but makes things easier for Podman users, who otherwise need to
specify the full name because Podman does not default to docker.io
This PR updates the envoy_bootstrap_hook to no longer disable itself if
the task driver in use is not docker. In other words, make it work for
podman and other image based task drivers. The hook now only checks that
1. the task is a connect sidecar
2. the task.config block contains an "image" field
The first start of a Consul Connect proxy sidecar triggers a run
of the envoy_version hook which modifies the task config image
entry. The modification takes into account a number of factors to
correctly populate this. Importantly, once the hook has run, it
marks itself as done so the taskrunner will not execute it again.
When the client receives a non-destructive update for the
allocation which the proxy sidecar is a member of, it will update
and overwrite the task definition within the taskerunner. In doing
so it overwrite the modification performed by the hook. If the
allocation is restarted, the envoy_version hook will be skipped as
it previously marked itself as done, and therefore the sidecar
config image is incorrect and causes a driver error.
The fix removes the hook in marking itself as done to the view of
the taskrunner.
Fixes#2522
Skip embedding client.alloc_dir when building chroot. If a user
configures a Nomad client agent so that the chroot_env will embed the
client.alloc_dir, Nomad will happily infinitely recurse while building
the chroot until something horrible happens. The best case scenario is
the filesystem's path length limit is hit. The worst case scenario is
disk space is exhausted.
A bad agent configuration will look something like this:
```hcl
data_dir = "/tmp/nomad-badagent"
client {
enabled = true
chroot_env {
# Note that the source matches the data_dir
"/tmp/nomad-badagent" = "/ohno"
# ...
}
}
```
Note that `/ohno/client` (the state_dir) will still be created but not
`/ohno/alloc` (the alloc_dir).
While I cannot think of a good reason why someone would want to embed
Nomad's client (and possibly server) directories in chroots, there
should be no cause for harm. chroots are only built when Nomad runs as
root, and Nomad disables running exec jobs as root by default. Therefore
even if client state is copied into chroots, it will be inaccessible to
tasks.
Skipping the `data_dir` and `{client,server}.state_dir` is possible, but
this PR attempts to implement the minimum viable solution to reduce risk
of unintended side effects or bugs.
When running tests as root in a vm without the fix, the following error
occurs:
```
=== RUN TestAllocDir_SkipAllocDir
alloc_dir_test.go:520:
Error Trace: alloc_dir_test.go:520
Error: Received unexpected error:
Couldn't create destination file /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/testtask/nomad/test/testtask/.../nomad/test/testtask/secrets/.nomad-mount: open /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/.../testtask/secrets/.nomad-mount: file name too long
Test: TestAllocDir_SkipAllocDir
--- FAIL: TestAllocDir_SkipAllocDir (22.76s)
```
Also removed unused Copy methods on AllocDir and TaskDir structs.
Thanks to @eveld for not letting me forget about this!
Nomad v1.0.0 introduced a regression where the client configurations
for `connect.sidecar_image` and `connect.gateway_image` would be
ignored despite being set. This PR restores that functionality.
There was a missing layer of interpolation that needs to occur for
these parameters. Since Nomad 1.0 now supports dynamic envoy versioning
through the ${NOMAD_envoy_version} psuedo variable, we basically need
to first interpolate
${connect.sidecar_image} => envoyproxy/envoy:v${NOMAD_envoy_version}
then use Consul at runtime to resolve to a real image, e.g.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.16.0
Of course, if the version of Consul is too old to provide an envoy
version preference, we then need to know to fallback to the old
version of envoy that we used before.
envoyproxy/envoy:v${NOMAD_envoy_version} => envoyproxy/envoy:v1.11.2@sha256:a7769160c9c1a55bb8d07a3b71ce5d64f72b1f665f10d81aa1581bc3cf850d09
Beyond that, we also need to continue to support jobs that set the
sidecar task themselves, e.g.
sidecar_task { config { image: "custom/envoy" } }
which itself could include teh pseudo envoy version variable.
As newer versions of Consul are released, the minimum version of Envoy
it supports as a sidecar proxy also gets bumped. Starting with the upcoming
Consul v1.9.X series, Envoy v1.11.X will no longer be supported. Current
versions of Nomad hardcode a version of Envoy v1.11.2 to be used as the
default implementation of Connect sidecar proxy.
This PR introduces a change such that each Nomad Client will query its
local Consul for a list of Envoy proxies that it supports (https://github.com/hashicorp/consul/pull/8545)
and then launch the Connect sidecar proxy task using the latest supported version
of Envoy. If the `SupportedProxies` API component is not available from
Consul, Nomad will fallback to the old version of Envoy supported by old
versions of Consul.
Setting the meta configuration option `meta.connect.sidecar_image` or
setting the `connect.sidecar_task` stanza will take precedence as is
the current behavior for sidecar proxies.
Setting the meta configuration option `meta.connect.gateway_image`
will take precedence as is the current behavior for connect gateways.
`meta.connect.sidecar_image` and `meta.connect.gateway_image` may make
use of the special `${NOMAD_envoy_version}` variable interpolation, which
resolves to the newest version of Envoy supported by the Consul agent.
Addresses #8585#7665
