In Nomad 1.2.6 we shipped `eval list`, which accepts a `-json` flag, and
deprecated the usage of `eval status` without an evaluation ID with an upgrade
note that it would be removed in Nomad 1.4.0. This changeset completes that
work.
The `operator debug` command writes JSON files from API responses as a single
line containing an array of JSON objects. But some of these files can be
extremely large (GB's) for large production clusters, which makes it difficult
to parse them using typical line-oriented Unix command line tools that can
stream their inputs without consuming a lot of memory.
For collections that are typically large, instead emit newline-delimited JSON.
This changeset includes some first-pass refactoring of this command. It breaks
up monolithic methods that validate a path, create a file, serialize objects,
and write them to disk into smaller functions, some of which can now be
standalone to take advantage of generics.
Operators may have a setup whereby the TLS config comes from a
source other than setting Nomad specific env vars. In this case,
we should attempt to identify the scheme using the config setting
as a fallback.
* cleanup: refactor MapStringStringSliceValueSet to be cleaner
* cleanup: replace SliceStringToSet with actual set
* cleanup: replace SliceStringSubset with real set
* cleanup: replace SliceStringContains with slices.Contains
* cleanup: remove unused function SliceStringHasPrefix
* cleanup: fixup StringHasPrefixInSlice doc string
* cleanup: refactor SliceSetDisjoint to use real set
* cleanup: replace CompareSliceSetString with SliceSetEq
* cleanup: replace CompareMapStringString with maps.Equal
* cleanup: replace CopyMapStringString with CopyMap
* cleanup: replace CopyMapStringInterface with CopyMap
* cleanup: fixup more CopyMapStringString and CopyMapStringInt
* cleanup: replace CopySliceString with slices.Clone
* cleanup: remove unused CopySliceInt
* cleanup: refactor CopyMapStringSliceString to be generic as CopyMapOfSlice
* cleanup: replace CopyMap with maps.Clone
* cleanup: run go mod tidy
The `TestVarGetCommand` test uses the wrong namespace in the autocomplete
test. The namespace only gets validated against if we have quota enforcement (or
more typically by ACL checks), so the test only fails in the ENT repo test runs.
This PR implements support for check_restart for checks registered
in the Nomad service provider.
Unlike Consul, Nomad service checks never report a "warning" status,
and so the check_restart.ignore_warnings configuration is not valid
for Nomad service checks.
This PR refactors agent/consul/check_watcher into client/serviceregistration,
and abstracts away the Consul-specific check lookups.
In doing so we should be able to reuse the existing check watcher logic for
also watching NSD checks in a followup PR.
A chunk of consul/unit_test.go is removed - we'll cover that in e2e tests
in a follow PR if needed. In the long run I'd like to remove this whole file.
When querying the checks for an allocation, the request must be
forwarded to the agent that is running the allocation. If the
initial request is made to a server agent, the request can be made
directly to the client agent running the allocation. If the
request is made to a client agent not running the alloc, the
request needs to be forwarded to a server and then the correct
client.
Nomad's original autopilot was importing from a private package in Consul. It
has been moved out to a shared library. Switch Nomad to use this library so that
we can eliminate the import of Consul, which is necessary to build Nomad ENT
with the current version of the Consul SDK. This also will let us pick up
autopilot improvements shared with Consul more easily.
These options are mutually exclusive but, since `-hcl2-strict` defaults
to `true` users had to explicitily set it to `false` when using `-hcl1`.
Also return `255` when job plan fails validation as this is the expected
code in this situation.
* Update Consul Template dep to support Nomad vars
* Remove `Peering` config for Consul Testservers
Upgrading to the 1.14 Consul SDK introduces and additional default
configuration—`Peering`—that is not compatible with versions of Consul
before v1.13.0. because Nomad tests against Consul v1.11.1, this
configuration has to be nil'ed out before passing it to the Consul
binary.
Neither the `os.Setenv` nor `t.Setenv` helper are safe to use in parallel tests
because environment variables are process-global. The stdlib panics if you try
to do this. Remove the `ci.Parallel()` call from all tests where we're setting
environment variables.
Nomad reconciles services it expects to be registered in Consul with
what is actually registered in the local Consul agent. This is necessary
to prevent leaking service registrations if Nomad crashes at certain
points (or if there are bugs).
When Consul has namespaces enabled, we must iterate over each available
namespace to be sure no services were leaked into non-default
namespaces.
Since this reconciliation happens often, there's no need to require
results from the Consul leader server. In large clusters this creates
far more load than the "freshness" of the response is worth.
Therefore this patch switches the request to AllowStale=true
* allocrunner: handle lifecycle when all tasks die
When all tasks die the Coordinator must transition to its terminal
state, coordinatorStatePoststop, to unblock poststop tasks. Since this
could happen at any time (for example, a prestart task dies), all states
must be able to transition to this terminal state.
* allocrunner: implement different alloc restarts
Add a new alloc restart mode where all tasks are restarted, even if they
have already exited. Also unifies the alloc restart logic to use the
implementation that restarts tasks concurrently and ignores
ErrTaskNotRunning errors since those are expected when restarting the
allocation.
* allocrunner: allow tasks to run again
Prevent the task runner Run() method from exiting to allow a dead task
to run again. When the task runner is signaled to restart, the function
will jump back to the MAIN loop and run it again.
The task runner determines if a task needs to run again based on two new
task events that were added to differentiate between a request to
restart a specific task, the tasks that are currently running, or all
tasks that have already run.
* api/cli: add support for all tasks alloc restart
Implement the new -all-tasks alloc restart CLI flag and its API
counterpar, AllTasks. The client endpoint calls the appropriate restart
method from the allocrunner depending on the restart parameters used.
* test: fix tasklifecycle Coordinator test
* allocrunner: kill taskrunners if all tasks are dead
When all non-poststop tasks are dead we need to kill the taskrunners so
we don't leak their goroutines, which are blocked in the alloc restart
loop. This also ensures the allocrunner exits on its own.
* taskrunner: fix tests that waited on WaitCh
Now that "dead" tasks may run again, the taskrunner Run() method will
not return when the task finishes running, so tests must wait for the
task state to be "dead" instead of using the WaitCh, since it won't be
closed until the taskrunner is killed.
* tests: add tests for all tasks alloc restart
* changelog: add entry for #14127
* taskrunner: fix restore logic.
The first implementation of the task runner restore process relied on
server data (`tr.Alloc().TerminalStatus()`) which may not be available
to the client at the time of restore.
It also had the incorrect code path. When restoring a dead task the
driver handle always needs to be clear cleanly using `clearDriverHandle`
otherwise, after exiting the MAIN loop, the task may be killed by
`tr.handleKill`.
The fix is to store the state of the Run() loop in the task runner local
client state: if the task runner ever exits this loop cleanly (not with
a shutdown) it will never be able to run again. So if the Run() loops
starts with this local state flag set, it must exit early.
This local state flag is also being checked on task restart requests. If
the task is "dead" and its Run() loop is not active it will never be
able to run again.
* address code review requests
* apply more code review changes
* taskrunner: add different Restart modes
Using the task event to differentiate between the allocrunner restart
methods proved to be confusing for developers to understand how it all
worked.
So instead of relying on the event type, this commit separated the logic
of restarting an taskRunner into two methods:
- `Restart` will retain the current behaviour and only will only restart
the task if it's currently running.
- `ForceRestart` is the new method where a `dead` task is allowed to
restart if its `Run()` method is still active. Callers will need to
restart the allocRunner taskCoordinator to make sure it will allow the
task to run again.
* minor fixes
The `namespace` field was not included in the equality check between old and new
Vault configurations, which meant that a Vault config change that only changed
the namespace would not be detected as a change and the clients would not be
reloaded.
Also, the comparison for boolean fields such as `enabled` and
`allow_unauthenticated` was on the pointer and not the value of that pointer,
which results in spurious reloads in real config reload that is easily missed in
typical test scenarios.
Includes a minor refactor of the order of fields for `Copy` and `Merge` to match
the struct fields in hopes it makes it harder to make this mistake in the
future, as well as additional test coverage.
This PR fixes a flakey test where we did not wait on the check
status to actually become failing (go too fast and you just get
a pending check).
Instead add a helper for waiting on any check in the alloc to become
the state we are looking for.
