Plan rejections occur when the scheduler work and the leader plan
applier disagree on the feasibility of a plan. This may happen for valid
reasons: since Nomad does parallel scheduling, it is expected that
different workers will have a different state when computing placements.
As the final plan reaches the leader plan applier, it may no longer be
valid due to a concurrent scheduling taking up intended resources. In
these situations the plan applier will notify the worker that the plan
was rejected and that they should refresh their state before trying
again.
In some rare and unexpected circumstances it has been observed that
workers will repeatedly submit the same plan, even if they are always
rejected.
While the root cause is still unknown this mitigation has been put in
place. The plan applier will now track the history of plan rejections
per client and include in the plan result a list of node IDs that should
be set as ineligible if the number of rejections in a given time window
crosses a certain threshold. The window size and threshold value can be
adjusted in the server configuration.
To avoid marking several nodes as ineligible at one, the operation is rate
limited to 5 nodes every 30min, with an initial burst of 10 operations.
Fixes#13505
This fixes#13505 by treating reserved_ports like we treat a lot of jobspec settings: merging settings from more global stanzas (client.reserved.reserved_ports) "down" into more specific stanzas (client.host_networks[].reserved_ports).
As discussed in #13505 there are other options, and since it's totally broken right now we have some flexibility:
Treat overlapping reserved_ports on addresses as invalid and refuse to start agents. However, I'm not sure there's a cohesive model we want to publish right now since so much 0.9-0.12 compat code still exists! We would have to explain to folks that if their -network-interface and host_network addresses overlapped, they could only specify reserved_ports in one place or the other?! It gets ugly.
Use the global client.reserved.reserved_ports value as the default and treat host_network[].reserverd_ports as overrides. My first suggestion in the issue, but @groggemans made me realize the addresses on the agent's interface (as configured by -network-interface) may overlap with host_networks, so you'd need to remove the global reserved_ports from addresses shared with a shared network?! This seemed really confusing and subtle for users to me.
So I think "merging down" creates the most expressive yet understandable approach. I've played around with it a bit, and it doesn't seem too surprising. The only frustrating part is how difficult it is to observe the available addresses and ports on a node! However that's a job for another PR.
When the `Full` flag is passed for key rotation, we kick off a core
job to decrypt and re-encrypt all the secure variables so that they
use the new key.
* SV: CAS
* Implement Check and Set for Delete and Upsert
* Reading the conflict from the state store
* Update endpoint for new error text
* Updated HTTP api tests
* Conflicts to the HTTP api
* SV: structs: Update SV time to UnixNanos
* update mock to UnixNano; refactor
* SV: encrypter: quote KeyID in error
* SV: mock: add mock for namespace w/ SV
* Add Path only index for SecureVariables
* Add GetSecureVariablesByPrefix; refactor tests
* Add search for SecureVariables
* Add prefix search for secure variables
This PR splits SecureVariable into SecureVariableDecrypted and
SecureVariableEncrypted in order to use the type system to help
verify that cleartext secret material is not committed to file.
* Make Encrypt function return KeyID
* Split SecureVariable
Co-authored-by: Tim Gross <tgross@hashicorp.com>
After internal design review, we decided to remove exposing algorithm
choice to the end-user for the initial release. We'll solve nonce
rotation by forcing rotations automatically on key GC (in a core job,
not included in this changeset). Default to AES-256 GCM for the
following criteria:
* faster implementation when hardware acceleration is available
* FIPS compliant
* implementation in pure go
* post-quantum resistance
Also fixed a bug in the decoding from keystore and switched to a
harder-to-misuse encoding method.
When a server becomes leader, it will check if there are any keys in
the state store, and create one if there is not. The key metadata will
be replicated via raft to all followers, who will then get the key
material via key replication (not implemented in this changeset).
This changeset implements the keystore serialization/deserialization:
* Adds a JSON serialization extension for the `RootKey` struct, along with a metadata stub. When we serialize RootKey to the on-disk keystore, we want to base64 encode the key material but also exclude any frequently-changing fields which are stored in raft.
* Implements methods for loading/saving keys to the keystore.
* Implements methods for restoring the whole keystore from disk.
* Wires it all up with the `Keyring` RPC handlers and fixes up any fallout on tests.
* core: allow pause/un-pause of eval broker on region leader.
* agent: add ability to pause eval broker via scheduler config.
* cli: add operator scheduler commands to interact with config.
* api: add ability to pause eval broker via scheduler config
* e2e: add operator scheduler test for eval broker pause.
* docs: include new opertor scheduler CLI and pause eval API info.
This PR adds the 'choose' query parameter to the '/v1/service/<service>' endpoint.
The value of 'choose' is in the form '<number>|<key>', number is the number
of desired services and key is a value unique but consistent to the requester
(e.g. allocID).
Folks aren't really expected to use this API directly, but rather through consul-template
which will soon be getting a new helper function making use of this query parameter.
Example,
curl 'localhost:4646/v1/service/redis?choose=2|abc123'
Note: consul-templte v0.29.1 includes the necessary nomadServices functionality.
Fix numerous go-getter security issues:
- Add timeouts to http, git, and hg operations to prevent DoS
- Add size limit to http to prevent resource exhaustion
- Disable following symlinks in both artifacts and `job run`
- Stop performing initial HEAD request to avoid file corruption on
retries and DoS opportunities.
**Approach**
Since Nomad has no ability to differentiate a DoS-via-large-artifact vs
a legitimate workload, all of the new limits are configurable at the
client agent level.
The max size of HTTP downloads is also exposed as a node attribute so
that if some workloads have large artifacts they can specify a high
limit in their jobspecs.
In the future all of this plumbing could be extended to enable/disable
specific getters or artifact downloading entirely on a per-node basis.
* test: use `T.TempDir` to create temporary test directory
This commit replaces `ioutil.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ioutil.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix TestLogmon_Start_restart on Windows
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
* test: fix failing TestConsul_Integration
t.TempDir fails to perform the cleanup properly because the folder is
still in use
testing.go:967: TempDir RemoveAll cleanup: unlinkat /tmp/TestConsul_Integration2837567823/002/191a6f1a-5371-cf7c-da38-220fe85d10e5/web/secrets: device or resource busy
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
After a more detailed analysis of this feature, the approach taken in
PR #12449 was found to be not ideal due to poor UX (users are
responsible for setting the entity alias they would like to use) and
issues around jobs potentially masquerading itself as another Vault
entity.
This PR introduces the `address` field in the `service` block so that Nomad
or Consul services can be registered with a custom `.Address.` to advertise.
The address can be an IP address or domain name. If the `address` field is
set, the `service.address_mode` must be set in `auto` mode.
* Add os to NodeListStub struct.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
* Add test: os as a query param to /v1/nodes.
Signed-off-by: Shishir Mahajan <smahajan@roblox.com>
The CSI HTTP API has to transform the CSI volume to redact secrets,
remove the claims fields, and to consolidate the allocation stubs into
a single slice of alloc stubs. This was done manually in #8590 but
this is a large amount of code and has proven both very bug prone
(see #8659, #8666, #8699, #8735, and #12150) and requires updating
lots of code every time we add a field to volumes or plugins.
In #10202 we introduce encoding improvements for the `Node` struct
that allow a more minimal transformation. Apply this same approach to
serializing `structs.CSIVolume` to API responses.
Also, the original reasoning behind #8590 for plugins no longer holds
because the counts are now denormalized within the state store, so we
can simply remove this transformation entirely.
This PR expands on the work done in #12543 to
- prefix the tag, so it is now "nomad.alloc_id" to be more consistent with Consul tags
- merge into pre-existing envoy_stats_tags fields
- update the upgrade guide docs
- update changelog
We expect every Nomad API client to use a single connection to any
given agent, so take advantage of keep-alive by switching the default
transport to `DefaultPooledClient`. Provide a facility to close idle
connections for testing purposes.
Restores the previously reverted #12409
Co-authored-by: Ben Buzbee <bbuzbee@cloudflare.com>
This change modifies the template task runner to utilise the
new consul-template which includes Nomad service lookup template
funcs.
In order to provide security and auth to consul-template, we use
a custom HTTP dialer which is passed to consul-template when
setting up the runner. This method follows Vault implementation.
Co-authored-by: Michael Schurter <mschurter@hashicorp.com>
