---
layout: docs
page_title: Nomad installation requirements
description: |-
  Learn about the hardware and networking resources that Nomad requires. Review RAM, CPU, network topology and ports, user permissions, and Linux capabilities.
---

# Nomad installation requirements

This page contains an overview of the hardware and networking resources that
Nomad requires. Review RAM, CPU, network topology and ports, user
permissions, and Linux capabilities.

## Resources

**Nomad servers** may need to be run on large machine instances. We suggest
having between 4-8+ cores, 16-32 GB+ of memory, 40-80 GB+ of **fast** disk and
significant network bandwidth. The core count and network recommendations are to
ensure high throughput as Nomad heavily relies on network communication and as
the Servers are managing all the nodes in the region and performing scheduling.
The memory and disk requirements are due to the fact that Nomad stores all state
in memory and will store two snapshots of this data onto disk, which causes high IO in busy clusters with lots of writes. Thus disk should
be at least 2 times the memory available to the server when deploying a high
load cluster. When running on AWS prefer NVME or Provisioned IOPS SSD storage for data dir.

These recommendations are guidelines and operators should always monitor the
resource usage of Nomad to determine if the machines are under or over-sized.

**Nomad clients** support reserving resources on the node that should not be
used by Nomad. This should be used to target a specific resource utilization per
node and to reserve resources for applications running outside of Nomad's
supervision such as Consul and the operating system itself.

Please see the [reservation configuration](/nomad/docs/configuration/client#reserved) for
more detail.

## Network topology

**Nomad servers** are expected to have sub 10 millisecond network latencies
between each other to ensure liveness and high throughput scheduling. Nomad
servers can be spread across multiple datacenters if they have low latency
connections between them to achieve high availability.

For example, on AWS every region comprises of multiple zones which have very low
latency links between them, so every zone can be modeled as a Nomad datacenter
and every Zone can have a single Nomad server which could be connected to form a
quorum and a region.

Nomad servers uses Raft for state replication and Raft being highly consistent
needs a quorum of servers to function, therefore we recommend running an odd
number of Nomad servers in a region. Usually running 3-5 servers in a region is
recommended. The cluster can withstand a failure of one server in a cluster of
three servers and two failures in a cluster of five servers. Adding more servers
to the quorum adds more time to replicate state and hence throughput decreases
so we don't recommend having more than seven servers in a region.

**Nomad clients** do not have the same latency requirements as servers since they
are not participating in Raft. Thus clients can have 100+ millisecond latency to
their servers. This allows having a set of Nomad servers that service clients
that can be spread geographically over a continent or even the world in the case
of having a single "global" region and many datacenter.

Nomad clients make connections to servers on the RPC port and then maintain a
persistent TCP connection. The server and client use this TCP connection for
two-way communication. As a result, clients that are geographically distributed
from the servers do not need to have publicly routable IP addresses in order
to communicate with the servers (although the workloads running on the clients
may need public IPs). All connections between Nomad servers and between clients
and servers must be secured with [mTLS][].

Nomad clients are typically not required to be reachable from each other unless
your workloads need to communicate with each other. The optional [ephemeral disk
migration][] field is one exception, and requires that clients can reach each
other on their HTTP ports.

## Ports used

Nomad requires 3 different ports to work properly on servers and 2 on clients,
some on TCP, UDP, or both protocols. Below we document the requirements for each
port. If you use a firewall of any type, you must ensure that it is configured to
allow the following traffic.

- HTTP API (Default 4646). This is used by clients and servers to serve the HTTP
  API. TCP only.

- RPC (Default 4647). This is used for internal RPC communication between client
  agents and servers, and for inter-server traffic. TCP only.

- Serf WAN (Default 4648). This is used by servers to gossip both over the LAN and
  WAN to other servers. It isn't required that Nomad clients can reach this address.
  TCP and UDP.

When tasks ask for dynamic ports, they are allocated out of the port range
between 20,000 and 32,000. This is well under the ephemeral port range suggested
by the [IANA](https://en.wikipedia.org/wiki/Ephemeral_port). If your operating
system's default ephemeral port range overlaps with Nomad's dynamic port range,
you should tune the OS to avoid this overlap.

On Linux this can be checked and set as follows:

```shell-session
$ cat /proc/sys/net/ipv4/ip_local_port_range
32768   60999
$ echo "49152 65535" > /proc/sys/net/ipv4/ip_local_port_range
```

## Bridge networking and `iptables`

@include 'install/bridge-iptables.mdx'

## Cgroup controllers

@include 'install/cgroup-controllers.mdx'

## Hardening Nomad

As noted in the [Security Model][] guide, Nomad is not **secure-by-default**.

### User permissions

Nomad servers and Nomad clients have different requirements for permissions.

Nomad servers should be run with the lowest possible permissions. They need
access to their own data directory and the ability to bind to their ports. You
should create a `nomad` user with the minimal set of required privileges. If you
are installing Nomad from the official Linux packages, the systemd unit file
runs Nomad as `root`. For your server nodes you should change this to a
minimally privileged `nomad` user. See the [production deployment guide][] for
details.

Nomad clients must be run as `root` due to the OS isolation mechanisms that
require root privileges (see also [Linux Capabilities][] below). The Nomad
client's data directory should be owned by `root` with filesystem permissions
set to `0700`.

### Linux capabilities

On Linux, Nomad clients require privileged capabilities for isolating
tasks. Nomad clients require `CAP_SYS_ADMIN` for creating the tmpfs used for
secrets, bind-mounting task directories, mounting volumes, and running some task
driver plugins. Nomad clients require `CAP_NET_ADMIN` for a variety of tasks to
set up networking. You should run Nomad clients as `root`, but running as `root`
does not grant these required capabilities if Nomad is running in a user
namespace. Running Nomad clients inside a user namespace is unsupported. See the
[`capabilities(7)`][] man page for details on Linux capabilities.

In order to run a task, Nomad clients perform privileged operations normally
reserved to the `root` user:

* Mounting tmpfs file systems for the task `/secrets` directory.
* Creating the network bridge for `bridge` networking.
* Allowing inbound and outbound network traffic to the workload (typically via
  `iptables`).
* Starting tasks as a specific `user`.
* Setting the owner of `template` outputs.

On Linux this set of requirements expands to:

* Configuring resource isolation via cgroups.
* Configuring namespace isolation: `mount`, `user`, `pid`, `ipc`, and `network`
  namespaces.

Nomad task drivers that support bind-mounting volumes also need to run as `root`
to do so. This includes the built-in `exec` and `java` task drivers. The
built-in task drivers run in the same process as the Nomad client, so this
requires that the Nomad client agent is also running as `root`.

### Rootless Nomad clients

Although it's possible to run a Nomad client agent as a non-root user or as
`root` in a user namespace, to perform the privileged operations described above
you also need to grant the client agent `CAP_SYS_ADMIN` and `CAP_NET_ADMIN`
capabilities. Note that these capabilities are nearly functionally equivalent to
running as `root` and that a process running with `CAP_SYS_ADMIN` can almost
always escalate itself to "true" (unnamespaced) `root`.

Some task drivers delegate many of their privileged operations to an external
process such as `dockerd` or `podman`. If you don't need `bridge` networking and
are using these task drivers or custom task drivers, you may be able to run
Nomad client agents as a non-root user with the following additional
configuration:

* Delegated cgroups: to safely set cgroups as an unprivileged user requires
  cgroups v2.
* User namespaces: on some distros this may require setting sysctls like
  `kernel.unprivileged_userns_clone=1`
* The task driver engine (ex. `dockerd`, `podman`, `containerd`, etc) must be
  configured for rootless operation. This requires cgroups v2, user namespaces,
  and typically either a patched kernel or kernel module (ex. `overlay.ko`)
  allowing unprivileged [overlay filesystem][] or a FUSE overlay filesystem.

This is not a supported or well-tested configuration. See [GH-13669][] for a
further discussion and to provide feedback on your experiences trying to run
rootless Nomad clients.

## Running Nomad in Docker

Running systems as Docker containers has become a common practice. While it's
possible to run Nomad servers inside containers, Nomad clients require
extensive access to the underlying host machine, as described in
[Rootless Nomad Clients][]. Docker containers introduce a non-trivial
abstraction layer that makes it hard to properly configure clients and task
drivers therefore **running Nomad clients in Docker containers is not
officially supported**.

The [`hashicorp/nomad`][nomad_docker_hub] Docker image is intended to be used
in automated pipelines for [CLI operations][docs_cli], such as
[`nomad job plan`][], [`nomad fmt`][], and others.

~> **Note:** The Nomad Docker image is not tested when running as an agent.

[Security Model]: /nomad/docs/concepts/security
[production deployment guide]: /nomad/tutorials/enterprise/production-deployment-guide-vm-with-consul#configure-systemd
[linux capabilities]: #linux-capabilities
[`capabilities(7)`]: https://man7.org/linux/man-pages/man7/capabilities.7.html
[overlay filesystem]: https://www.kernel.org/doc/html/latest/filesystems/overlayfs.html
[GH-13669]: https://github.com/hashicorp/nomad/issues/13669
[Rootless Nomad Clients]: #rootless-nomad-clients
[nomad_docker_hub]: https://hub.docker.com/r/hashicorp/nomad
[docs_cli]: /nomad/docs/commands
[`nomad job plan`]: /nomad/docs/commands/job/plan
[`nomad fmt`]: /nomad/docs/commands/fmt
[mTLS]: /nomad/tutorials/transport-security/security-enable-tls
[ephemeral disk migration]: /nomad/docs/job-specification/ephemeral_disk#migrate
