xc/cli/help.go

package cli

import (
	"fmt"
	"strings"

	"github.com/viert/xc/term"
)

type helpItem struct {
	help    string
	usage   string
	isTopic bool
}

var (
	execHelp = &helpItem{
		usage: "<host_expression> <command>",
		help: `Runs a command on a list of servers.

List of hosts is represented by <host_expression> in its own syntax which can be learned 
by using "help expressions" command.

exec can proceed in 3 different modes: serial, parallel and collapse.

In ` + term.Colored("serial", term.CWhite, true) + ` mode the command will be called server by server sequentally. Between servers in list 
xc will hold for a delay which can be set with command "delay".

In ` + term.Colored("parallel", term.CWhite, true) + ` mode the command will be executed simultaneously. All output will be prefixed by 
host name which the output line belongs to. Output is (almost) non buffered so one can use
parallel mode to run "infinite" commands like "tail -f" which is handy for watching logs from 
the whole cluster in real-time.

The ` + term.Colored("collapse", term.CWhite, true) + ` mode is a lot like the parallel mode however the whole output is hidden until
the execution is over. In this mode xc prints the result grouped by the output so the differences
between hosts become more obvious. Try running "exec %group cat /etc/redhat-release" on a big
group of hosts in collapse mode to see if they have the same version of OS for example.

While the execution mode can be switched by "mode" command, there's a couple of shortcuts: 
    c_exec 
    p_exec
    s_exec 
which are capable to run exec in collapse, parallel or serial mode correspondingly without switching
the execution mode`,
	}

	runScriptHelp = &helpItem{
		usage: "<host_expression> <scriptname>",
		help: `Runs a local script on a given list of hosts.

To learn mode about <host_expression> type "help expressions".

runscript simply copies the script to every server in the list and then
run it according to current execution mode (Type "help exec" to learn more 
on execution modes), i.e. it can run in parallel or sequentally like exec does.

There are also shortcut aliases c_runscript, s_runscript and p_runscript for calling runscript
in a particular execution mode without permanent switching to it.`,
	}

	modeHelp = `Switches execution mode

To learn more about execution modes type "help exec".

Xc has shortcuts for switching modes: just type "parallel", "serial" or "collapse" and it will 
switch the mode correspondingly.`

	helpStrings = map[string]*helpItem{
		"alias": &helpItem{
			usage: "<aliasname> <cmd> [<args>]",
			help: `Creates a local alias. This is handy for longer commands which are often in use.
        
Example: 
    alias ls local ls               - this will create a local alias "ls" which actually runs "local ls"
    alias uptime p_exec #1 uptime   - this creates a local alias "uptime" which runs "p_exec <ARG> uptime"
                                      <ARG> will be taken from the alias command and put into p_exec command,
                                      i.e. uptime %mygroup will run p_exec %mygroup uptime

Every alias created disappears after xc exits. To make an alias persistent put it into rcfile. 
See "help rcfiles" for further info.`,
		},

		"cd": &helpItem{
			usage: "<dir>",
			help:  "Changes working directory",
		},

		"config": &helpItem{
			isTopic: true,
			help: `Configuration file is located in ~/.xc.conf.
			
The first time xc starts it creates a default configuration file with all the settings set
to default values:

[main]
user = 
mode = parallel
history_file = ~/.xc_history
cache_dir = ~/.xc_cache
rc_file = ~/.xcrc
raise = none
exit_confirm = true
backend_type = conductor
local_file = ~/.xc_hosts

[executer]
ssh_threads = 50
ssh_connect_timeout = 1
ping_count = 5
progress_bar = true
remote_tmpdir = /tmp
delay = 0

[inventoree]
url = http://c.inventoree.ru
work_groups = 

Configuration is split to 3 sections: main, executer and inventoree.

main.user is the user which will be set on xc startup. If empty, the current system user is used.

main.mode is the execution mode which will be set on xc startup. See "help mode" for more info on execution modes.

main.history_file sets the history file

main.cache_dir sets the cache dir for data derived from inventoree

main.rc_file is the rcfile which will be executed on xc startup. See "help rcfiles" for more info.

main.raise is the raise mode which will be set on xc startup

main.exit_confirm is boolean setting for disable or enable confirmation on exit

main.backend_type is type of backend, conductor or localjson or localini now

main.local_file is path to json or ini local file, used when backend_type is localjson or localini

executer.ssh_threads limits the number of simultaneously running ssh commands.

executer.ssh_connect_timeout sets the default ssh connect timeout. You can change it at any moment using connect_timeout command.

executer.ping_count is not implemented yet and does nothing

executer.progress_bar sets progressbar on or off on xc startup

executer.remote_tmpdir is a temporary directory used on remote servers for various xc needs

executer.delay sets a delay in seconds between hosts when executing in serial mode. See "help delay" for more info

inventoree.url sets the url of the inventoree service

inventoree.work_groups is a comma-separated list of work_groups which will be downloaded from inventoree. 
	If empty all work groups (i.e. all groups and all hosts as well) are downloaded without filtering which
    may cause startup delays`,
		},

		"rcfiles": &helpItem{
			isTopic: true,
			help: `Rcfile configured in .xc.conf file is executed every time xc starts.
It may be useful for configuring aliases (as they are dropped when xc exits) and other options.
Rcfile is just a number of xc commands in a text file.`,
		},

		"passmgr": &helpItem{
			isTopic: true,
			help: `Password manager is a golang plugin which must have two exported functions:
func Init() error, which is called on xc start 
func GetPass(host string) (password string), which is kinda self-explanatory

For more info on how to write golang plugins, please refer to golang documentation or this article:
https://medium.com/learning-the-go-programming-language/writing-modular-go-programs-with-plugins-ec46381ee1a9`,
		},

		"debug": &helpItem{
			usage: "<on/off>",
			help:  `An internal debug. May cause unexpected output. One shouldn't use it unless she knows what she's doing.`,
		},

		"delay": &helpItem{
			usage: "<seconds>",
			help: `Sets a delay between hosts when in serial mode. This is useful for soft restarting
i.e. when you want to give a service some time to warm up before restarting it on next host.`,
		},

		"distribute": &helpItem{
			usage: "<host_expression> <filename>",
			help: `Distributes a local file to a number of hosts listed in "host_expression" in parallel.
See "help expressions" for further info on <host_expression>.

Example: distribute %mygroup hello.txt`,
		},

		"expressions": &helpItem{
			help: `A lot of commands in xc use host expressions with a certain syntax to represent a list of hosts.
Every expression is a comma-separated list of tokens, where token may be
    - a single host,
    - a single group,
    - a single workgroup,
and every item may optionally be limited to a particular datacenter, a given tag, 
or even be completely excluded from the list.

Some self-explanatory examples:
    host1,host2                         - simple host list containing 2 hosts
    %group1                             - a group of hosts taken from inventoree
    %group1,host1                       - all hosts from group1, plus host1
    %group1,-host2                      - all hosts from group1, excluding(!) host2
    %group2@dc1                         - all hosts from group2, located in datacenter dc1
    *myworkgroup@dc2,-%group3,host5     - all hosts from wg "myworkgroup" excluding hosts from group3, plus host5
    %group5#tag1                        - all hosts from group5 tagged with tag1
    
You may combine any number of tokens keeping in mind that they are resolved left to right, so exclusions
almost always should be on the righthand side. For example, "-host1,host1" will end up with host1 in list
despite being excluded previously.`,
			isTopic: true,
		},

		"exec":   execHelp,
		"s_exec": execHelp,
		"c_exec": execHelp,
		"p_exec": execHelp,

		"exit": &helpItem{
			usage: "",
			help:  "Exits the xc program. You can also use Ctrl-D to quit xc.",
		},

		"help": &helpItem{
			usage: "[<command>]",
			help:  "Shows help on various commands and topics",
		},

		"hostlist": &helpItem{
			usage: "<host_expression>",
			help: `Resolves the host expression and prints the resulting hostlist. To learn more about expressions
use "help expressions" command`,
		},

		"local": &helpItem{
			usage: "<command>",
			help: `Runs local command. 

For example you may want to ping a host without leaving the xc.
This can be done by typing "local ping 1.1.1.1". For frequently used commands you may want to create 
aliases like so: alias ping local ping #*. This will create an alias "ping" so you won't have to type
"local" in front of "ping" anymore. To learn more about aliases type "help alias"`,
		},

		"mode": &helpItem{
			usage: "<serial/parallel/collapse>",
			help:  modeHelp,
		},

		"parallel": &helpItem{
			usage: "",
			help:  modeHelp,
		},
		"serial": &helpItem{
			usage: "",
			help:  modeHelp,
		},
		"collapse": &helpItem{
			usage: "",
			help:  modeHelp,
		},

		"prepend_hostnames": &helpItem{
			usage: "<on/off>",
			help: `Sets prepend hostnames mode on or off. When calling without arguments, shows the current value.
This switches the appearence of hostnames before the output lines in parallel mode. 
Switching them off is useful for copy-pasting the results.`,
		},

		"passwd": &helpItem{
			usage: "",
			help:  `Sets the password for raising privileges`,
		},

		"progressbar": &helpItem{
			usage: "[<on/off>]",
			help:  `Sets the progressbar on or off. If no value is given, prints the current value.`,
		},

		"raise": &helpItem{
			usage: "<none/sudo/su>",
			help: `Sets the type of raising privileges during running the "exec" command. 
If the value is "none", no attempts to raise privileges will be made.`,
		},

		"reload": &helpItem{
			usage: "",
			help:  `Reloads hosts and groups data from inventoree and rewrites the cache`,
		},

		"runscript":   runScriptHelp,
		"c_runscript": runScriptHelp,
		"p_runscript": runScriptHelp,
		"s_runscript": runScriptHelp,

		"interpreter": &helpItem{
			usage: "[raise_type interpreter]",
			help: `When invoking without arguments, the command shows the current interpreters for each type
of privileges rasing ("help raise" to learn more on that). You can redefine interpreter
using this command as in the given examples:

interpreter su su -m
interpreter sudo sudo /bin/bash
interpreter none /bin/sh`,
		},

		"output": &helpItem{
			usage: "[filename]",
			help: `Copies the entire output of parallel(!) exec commands to a given logfile. To switch 
the logging off, type "output _". When invoked without arguments, output command prints
the current output filename (or a message saying that the output logging is switched off) 
and exits.`,
		},

		"ssh": &helpItem{
			usage: "<host_expression>",
			help: `Starts ssh session to hosts one by one, raising the privileges if raise type is not "none" 
("help raise" to learn more) and gives the control to user. When user exits the session
xc moves on to the next server.`,
		},

		"threads": &helpItem{
			usage: "[num_threads]",
			help: `Sets max number of simultaneously running ssh threads to <num_threads>. When called
without arguments, prints the current value.`,
		},

		"use_password_manager": &helpItem{
			usage: "[<on/off>]",
			help: `Sets the password manager on/off. If no value is given, prints the current value.
If password manager is not ready, setting this value to "on" will print an error.`,
		},

		"user": &helpItem{
			usage: "<username>",
			help:  `Sets the username for all the execution commands. This is used to get access to hosts via ssh/scp.`,
		},
	}
)

func (c *Cli) doHelp(name string, argsLine string, args ...string) {
	if len(args) < 1 {
		generalHelp()
		return
	}

	if hs, found := helpStrings[args[0]]; found {
		if hs.isTopic {
			fmt.Printf("\nTopic: %s\n\n", term.Colored(args[0], term.CWhite, true))
		} else {
			fmt.Printf("\nCommand: %s %s\n\n", term.Colored(args[0], term.CWhite, true), hs.usage)
		}
		tokens := strings.Split(hs.help, "\n")
		for _, token := range tokens {
			fmt.Printf("    %s\n", token)
		}
		fmt.Println()
	} else {
		term.Errorf("There's no help on topic \"%s\"\n", args[0])
	}
}

func generalHelp() {
	fmt.Println(`
List of commands:
    alias                                  creates a local alias command
    cd                                     changes current working directory
    collapse                               shortcut for "mode collapse"
    debug                                  one shouldn't use this
    delay                                  sets a delay between hosts in serial mode
    distribute                             copies a file to a number of hosts in parallel
    exec/c_exec/s_exec/p_exec              executes a remote command on a number of hosts
    exit                                   exits the xc
    help                                   shows help on various topics
    hostlist                               resolves a host expression to a list of hosts
    interpreter							   sets interpreter for each type of privileges raising
    local                                  starts a local command
    mode                                   switches between execution modes
    parallel                               shortcut for "mode parallel"
    passwd                                 sets passwd for privilege raise
    progressbar                            controls progressbar
    raise                                  sets the privilege raise mode
    reload                                 reloads hosts and groups data from inventoree
    runscript                              runs a local script on a number of remote hosts
    serial                                 shortcut for "mode serial"
	ssh                                    starts ssh session to a number of hosts sequentally
	use_password_manager                   turns password manager on/off
	user                                   sets current user`)
	fmt.Println()
}