## Development Environment Changes
* Added stringer to build deps
## New HTTP APIs
* Added scheduler worker config API
* Added scheduler worker info API
## New Internals
* (Scheduler)Worker API refactor—Start(), Stop(), Pause(), Resume()
* Update shutdown to use context
* Add mutex for contended server data
- `workerLock` for the `workers` slice
- `workerConfigLock` for the `Server.Config.NumSchedulers` and
`Server.Config.EnabledSchedulers` values
## Other
* Adding docs for scheduler worker api
* Add changelog message
Co-authored-by: Derek Strickland <1111455+DerekStrickland@users.noreply.github.com>
When a cluster doesn't have a leader, the `nomad operator debug`
command can safely use stale queries to gracefully degrade the
consistency of almost all its queries. The query parameter for these
API calls was not being set by the command.
Some `api` package queries do not include `QueryOptions` because
they target a specific agent, but they can potentially be forwarded to
other agents. If there is no leader, these forwarded queries will
fail. Provide methods to call these APIs with `QueryOptions`.
Some operators use very long group/task `shutdown_delay` settings to
safely drain network connections to their workloads after service
deregistration. But during incident response, they may want to cause
that drain to be skipped so they can quickly shed load.
Provide a `-no-shutdown-delay` flag on the `nomad alloc stop` and
`nomad job stop` commands that bypasses the delay. This sets a new
desired transition state on the affected allocations that the
allocation/task runner will identify during pre-kill on the client.
Note (as documented here) that using this flag will almost always
result in failed inbound network connections for workloads as the
tasks will exit before clients receive updated service discovery
information and won't be gracefully drained.
API queries can request pagination using the `NextToken` and `PerPage`
fields of `QueryOptions`, when supported by the underlying API.
Add a `NextToken` field to the `structs.QueryMeta` so that we have a
common field across RPCs to tell the caller where to resume paging
from on their next API call. Include this field on the `api.QueryMeta`
as well so that it's available for future versions of List HTTP APIs
that wrap the response with `QueryMeta` rather than returning a simple
list of structs. In the meantime callers can get the `X-Nomad-NextToken`.
Add pagination to the `Eval.List` RPC by checking for pagination token
and page size in `QueryOptions`. This will allow resuming from the
last ID seen so long as the query parameters and the state store
itself are unchanged between requests.
Add filtering by job ID or evaluation status over the results we get
out of the state store.
Parse the query parameters of the `Eval.List` API into the arguments
expected for filtering in the RPC call.
During incident response, operators may find that automated processes
elsewhere in the organization can be generating new workloads on Nomad
clusters that are unable to handle the workload. This changeset adds a
field to the `SchedulerConfiguration` API that causes all job
registration calls to be rejected unless the request has a management
ACL token.
The `TestHTTPServer_Limits_Error` test never starts the agent so it
had an incomplete configuration, which caused panics in the test. Fix
the configuration.
The PR #11555 had a branch name like `f-ui-*` which caused CI to skip
the unit tests over the HTTP handler setup, so this wasn't caught in
PR review.
This change modifies the Nomad job register and deregister RPCs to
accept an updated option set which includes eval priority. This
param is optional and override the use of the job priority to set
the eval priority.
In order to ensure all evaluations as a result of the request use
the same eval priority, the priority is shared to the
allocReconciler and deploymentWatcher. This creates a new
distinction between eval priority and job priority.
The Nomad agent HTTP API has been modified to allow setting the
eval priority on job update and delete. To keep consistency with
the current v1 API, job update accepts this as a payload param;
job delete accepts this as a query param.
Any user supplied value is validated within the agent HTTP handler
removing the need to pass invalid requests to the server.
The register and deregister opts functions now all for setting
the eval priority on requests.
The change includes a small change to the DeregisterOpts function
which handles nil opts. This brings the function inline with the
RegisterOpts.
* api: return 404 for alloc FS list/stat endpoints
If the alloc filesystem doesn't have a file requested by the List
Files or Stat File API, we currently return a HTTP 500 error with the
expected "file not found" error message. Return a HTTP 404 error
instead.
* update FS Handler
Previously the FS handler would interpret a 500 status as a 404
in the adapter layer by checking if the response body contained
the text or is the response status
was 500 and then throw an error code for 404.
Co-authored-by: Jai Bhagat <jaybhagat841@gmail.com>
- Making RPC Upgrade mode reloadable.
- Add suggestions from code review
- remove spurious comment
- switch to require(t,...) form for test.
- Add to changelog
Log the failure error when the agent fails to start. Previously, the
agent startup failure error would be emitted to the command UI but not
logged. So it doesn't get emitted to syslog or `log_file` if they are
set, and it makes debugging much harder. Also, logging the error again
before exit makes the error more visible: previously, the operator
needed to scroll to the top to find the error.
On a sample failure, the output will look like:
```
==> WARNING: Bootstrap mode enabled! Potentially unsafe operation.
==> Loaded configuration from sample-configs/config-bad
==> Starting Nomad agent...
==> Error starting agent: setting up server node ID failed: mkdir /path-without-permission: read-only file system
2021-10-20T14:38:51.179-0400 [WARN] agent.plugin_loader: skipping external plugins since plugin_dir doesn't exist: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [DEBUG] agent.plugin_loader.docker: using client connection initialized from environment: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [DEBUG] agent.plugin_loader.docker: using client connection initialized from environment: plugin_dir=/path-without-permission/plugins
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=java type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=docker type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=mock_driver type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=raw_exec type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=exec type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [INFO] agent: detected plugin: name=qemu type=driver plugin_version=0.1.0
2021-10-20T14:38:51.181-0400 [ERROR] agent: error starting agent: error="setting up server node ID failed: mkdir /path-without-permission: read-only file system"
```
This change adds the final `ERROR` message. It's easy to miss the `==>
Error starting agent` above.
Fixes#2522
Skip embedding client.alloc_dir when building chroot. If a user
configures a Nomad client agent so that the chroot_env will embed the
client.alloc_dir, Nomad will happily infinitely recurse while building
the chroot until something horrible happens. The best case scenario is
the filesystem's path length limit is hit. The worst case scenario is
disk space is exhausted.
A bad agent configuration will look something like this:
```hcl
data_dir = "/tmp/nomad-badagent"
client {
enabled = true
chroot_env {
# Note that the source matches the data_dir
"/tmp/nomad-badagent" = "/ohno"
# ...
}
}
```
Note that `/ohno/client` (the state_dir) will still be created but not
`/ohno/alloc` (the alloc_dir).
While I cannot think of a good reason why someone would want to embed
Nomad's client (and possibly server) directories in chroots, there
should be no cause for harm. chroots are only built when Nomad runs as
root, and Nomad disables running exec jobs as root by default. Therefore
even if client state is copied into chroots, it will be inaccessible to
tasks.
Skipping the `data_dir` and `{client,server}.state_dir` is possible, but
this PR attempts to implement the minimum viable solution to reduce risk
of unintended side effects or bugs.
When running tests as root in a vm without the fix, the following error
occurs:
```
=== RUN TestAllocDir_SkipAllocDir
alloc_dir_test.go:520:
Error Trace: alloc_dir_test.go:520
Error: Received unexpected error:
Couldn't create destination file /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/testtask/nomad/test/testtask/.../nomad/test/testtask/secrets/.nomad-mount: open /tmp/TestAllocDir_SkipAllocDir1457747331/001/nomad/test/.../testtask/secrets/.nomad-mount: file name too long
Test: TestAllocDir_SkipAllocDir
--- FAIL: TestAllocDir_SkipAllocDir (22.76s)
```
Also removed unused Copy methods on AllocDir and TaskDir structs.
Thanks to @eveld for not letting me forget about this!
FailoverHeartbeatTTL is the amount of time to wait after a server leader failure
before considering reallocating client tasks. This TTL should be fairly long as
the new server leader needs to rebuild the entire heartbeat map for the
cluster. In deployments with a small number of machines, the default TTL (5m)
may be unnecessary long. Let's allow operators to configure this value in their
config files.
By default we should not expose the NOMAD_LICENSE environment variable
to tasks.
Also refactor where the DefaultEnvDenyList lives so we don't have to
maintain 2 copies of it. Since client/config is the most obvious
location, keep a reference there to its unfortunate home buried deep
in command/agent/host. Since the agent uses this list as well for the
/agent/host endpoint the list must be accessible from both command/agent
and client.
Add a new hostname string parameter to the network block which
allows operators to specify the hostname of the network namespace.
Changing this causes a destructive update to the allocation and it
is omitted if empty from API responses. This parameter also supports
interpolation.
In order to have a hostname passed as a configuration param when
creating an allocation network, the CreateNetwork func of the
DriverNetworkManager interface needs to be updated. In order to
minimize the disruption of future changes, rather than add another
string func arg, the function now accepts a request struct along with
the allocID param. The struct has the hostname as a field.
The in-tree implementations of DriverNetworkManager.CreateNetwork
have been modified to account for the function signature change.
In updating for the change, the enhancement of adding hostnames to
network namespaces has also been added to the Docker driver, whilst
the default Linux manager does not current implement it.
* don't timestamp active log file
* website: update log_file default value
* changelog: add entry for #11070
* website: add upgrade instructions for log_file in v1.14 and v1.2.0
This PR implements a new "System Batch" scheduler type. Jobs can
make use of this new scheduler by setting their type to 'sysbatch'.
Like the name implies, sysbatch can be thought of as a hybrid between
system and batch jobs - it is for running short lived jobs intended to
run on every compatible node in the cluster.
As with batch jobs, sysbatch jobs can also be periodic and/or parameterized
dispatch jobs. A sysbatch job is considered complete when it has been run
on all compatible nodes until reaching a terminal state (success or failed
on retries).
Feasibility and preemption are governed the same as with system jobs. In
this PR, the update stanza is not yet supported. The update stanza is sill
limited in functionality for the underlying system scheduler, and is
not useful yet for sysbatch jobs. Further work in #4740 will improve
support for the update stanza and deployments.
Closes#2527
This PR will have Nomad de-register a sidecar proxy service before
attempting to de-register the parent service. Otherwise, Consul will
emit a warning and an error.
Fixes#10845
When a jobspec doesn't include a namespace, we provide it with the default
namespace, but this ends up overriding the explicit `-namespace` flag. This
changeset uses the same logic as region parsing to create an order of
precedence: the query string parameter (the `-namespace` flag) overrides the
API request body which overrides the jobspec.
This PR uses regex-based matching for sidecar proxy services and checks when syncing
with Consul. Previously we would check if the parent of the sidecar was still being
tracked in Nomad. This is a false invariant - one which we must not depend when we
make #10845 work.
Fixes#10843
The default agent configuration values were not set, which meant they were not
being set in the client configuration and this results in fingerprints failing
unless the values were set explicitly.
This PR makes it so the Consul sync logic will ignore operations that
do not specify an action to take (i.e. [de-]register [services|checks]).
Ideally such noops would be discarded at the callsites (i.e. users
of [Create|Update|Remove]Workload], but we can also be defensive
at the commit point.
Also adds 2 trace logging statements which are helpful for diagnosing
sync operations with Consul - when they happen and why.
Fixes#10797
